need advice for wire wheel-pic added

cubbrian

501 Club
I am looking at buying a wire wheel for my new bench grinder. My question is where to find a quality wheel. I don't want to buy a cheap wheel that the wires will fly out of in the first 5 minutes of use. By the way, I will post pics of the stand I am having made at work. Our welder loves the "government projects" as he calls them. :lol:
 
Brian:

Look for the twisted wire wheels. They tend to stay together much better.

Harbor Freight has these: 4" Stainless Steel Knotted Wire Wheel

image_2360.jpg


Of course there are better quality ones, probably from Acklands Grainger or other places.

Looking forward to your stand. I think many may be interested.
 
You Do not want to use those on a bench grinder !!!!!!!!!!!!!!!!!!!!!!!!!!

The twisted wire wheel is for the angle grinder...........
if you have a wire wheel with a mount on both ends you should prob put a steel brush on one end and a Brass one on the other.
just get a good quality one
and
always wear safty glasses when using the wire wheel :!:
 
Ralph is right, The safety & warnings sheet that comes with this wheel states "These wheels are to be used with an appropriate angle grinder".
 
OK folks....... the Harbor Freight item was shown for illustration purposes until I could find a better product.

Some home brewed wire wheel stations are made from work arbors and the model shown from Harbor Freight are for a right angle grinder. However, they will fit a work arbor with a threaded end and other manufacturers market them. For other bench grinders there are non-threaded twisted wire wheels. One model I found online is made by JET in the USA. JET is a well respected manufacturer who goes to great pains to ensure that their products are safe for even the home hobbiest.

[url=http://www.marcur.com/Abrasives%20PDF/51-56%20Marcur%20Jet%20Abrasives.pdf:lefpahf0 said:
KNOT TYPE WIRE WHEEL BRUSHES[/url]":lefpahf0]STANDARD FACE
KNOT WIRE WHEELS — UNTHREADED
• These brushes are identical to the above brushes but are unthreaded
• Can be used on angle grinders or bench grinders
PROD. MOD. Face Centre Wire Max.
NO. NO. Dia. Width Hole Size R.P.M. App.
550303 8006/1 6" 1/2" 5/8" - 1/2" .020 9,000 Steel
550306 8008/1 8" 1/2" 5/8" - 1/2" .020 8,500 Steel

Page 54 of the mercur catalog would be case in point!

Weiler and Osborn also make Knot Wire Wheels for stationary equipment as well.

There are many types of wheels that may be used in a stationary application, straight, crimped and knotted in a number of different materials from brass, steel, stainless steel, aluminum, nylon and other synthetic materials. Flap brushes are also useful and can be purchased in any number of grits. These are made for portable as well as stationary applications.

Of course, it should go without saying that proper safety equipment should be used at all times when using this type of equipment. Full face mask, leather apron and leather gloves should be basic practice for this type of operation.

I have knotted wire brushes/wheels made for Porter Cable, DeWalt, Task and other brands purchased from both Princess, Sears and specialized trade supply houses. Kind of funny that a Task is very similar in look and fabrication to Craftsman as well as King and a few dozen other brands. Buy according to your budget and according to the product specifications. Do do your research so that you are comfortable with the product you finally choose.
 
I have an 8" bench grinder and have found that "quality" wire wheels will eat up just as fast as the cheapies. I use the cheapies, as I burn through them pretty fast and at $15-20 a pop for the better ones--it adds up fast :shock: If you go the "cheapies", just make sure you have the grinder bolted down as the cheap out-of-round wheels will make that grinder walk all over the shop :roll: :wink:
 
I agree with Bill, we use 2 large air operated cup brushes all day everyday. The high dollar USA brushes didn't last half as long as the over seas brands and we go through a bunch of them. :roll:
 
I have two brushes stacked on the right side of the 6" bench grinder. makes a brush about 1" wide. Been using for 15 years+, no problems. Full guards and tool rest in place.
 
As promised, here is the picture of my new grinder stand. It pays to know the welder at work. I took him a 4 foot long piece of 4 inch schedule 40 pipe and this is what I ended up with. He even welded a handle on the back. :lol: It got wet in the back of the truck while driving home through what seemed like a small hurricane, that's what makes it look like it has metal flake paint in the picture.

DSC08702.JPG
 
It is a piece of angle iron welded to the front of the top plate that will be used to set small items. It's just a catch all.
 
Back
Top