My Next Pickem Up Truck

[Bill Hudson]

Only to be used for picking up parts or Sunday drives in the country.



Bill

 

[Bob McCarty]

Bill, what model is that? I didn't know that BMW made a vehicle like that. After looking at the license plate, I guess I won't see any over here anyway.

 

[Bill Hudson]

Bill, what model is that? I didn't know that BMW made a vehicle like that. After looking at the license plate, I guess I won't see any over here anyway.

Bob,
I snagged the pic off the internet. The narrative told what model it was that was modified to make that puppy but I don't remember.

Bill

 

[Jim Becker]

An El Beemerino?

 

[Dale Finch]

Probably only a few remember the El Camino!
https://www.ebay.com/motors/blog/chevrolet-el-camino-half-car-half-truck-all-business/

 

[Stanton]

High performance payload delivery.

 

[dgrapes59]

Cub Expressin' in style!

 

[Indy4570]

this is my "New" truck. 1959 Willys Jeep FC170 DRW It ain"t no Beemer but it would haul a cub if I only knew how to get it up there! :lol:

 

[Indy4570]

The beemer might haul a cub.. (cadet)

 

[Barnyard]

it would haul a cub if I only knew how to get it up there! :lol:

Ramps would do it.

 

[Indy4570]

it would haul a cub if I only knew how to get it up there! :lol:

Ramps would do it.

yeah but unless they were very long I might be skeert

 

[Barnyard]

 

[Indy4570]

the bed height is way more than my trailer. I think I will stick to the gooseneck and the Dodge. but I am very interested in learning more about the long ramps, actual length and what the capacity is.

 

[Barnyard]

I am very interested in learning more about the long ramps, actual length and what the capacity is.

Ramps are 10' lonf, 16" wide and hold 5,000 lbs per pair.

How high is your trailer bed?

 

[Don McCombs]

I think I’ll stick with my Tundra.

 

[Indy4570]

I am very interested in learning more about the long ramps, actual length and what the capacity is.

Ramps are 10' lonf, 16" wide and hold 5,000 lbs per pair.

How high is your trailer bed?

trailer is 19in at the beavertail, rest of the deck is 24in, FC bed height at the rear is 44 inches, so kinda tall. its a 9ft x 7ft bed. Where did you find your 10ft ramps?

it kinda sticks its butt up in the air. it has a 11350 GVW , as it was a fire truck when it was younger. I have not yet loaded it with anything that makes it squat

 

[Barnyard]

https://www.discountramps.com/ez-tracti ... -120-04-P/
I think we hijacked Bill's post lomg enough. Pm me for any other info.

Sorry Bill.

 

[Lt.Mike]

Paula and I have had a Tacoma on order since early October. We optioned it out with all the bells and whistles. It’s a 4 door Off Road TRD .
The idea is it’s an off road capable pickup for all the adventures chasing fossils that Paula will do while still being comfortable and cushy inside.
Being new and comfy we can take it on long trips and being a pickup we can bring home tractor parts we might find and yes Paula is right there with me with that purpose in mind.
This will be mostly her vehicle.
Now if the world will return to normal just long enough for Toyota to build this for us. :roll:

 

[Lt.Mike]

I am very interested in learning more about the long ramps, actual length and what the capacity is.

Ramps are 10' lonf, 16" wide and hold 5,000 lbs per pair.

How high is your trailer bed?

trailer is 19in at the beavertail, rest of the deck is 24in, FC bed height at the rear is 44 inches, so kinda tall. its a 9ft x 7ft bed. Where did you find your 10ft ramps?

it kinda sticks its butt up in the air. it has a 11350 GVW , as it was a fire truck when it was younger. I have not yet loaded it with anything that makes it squat

I like this
:thumbsup: :thumbsup:

 

[Jim Becker]

. . . It’s a 4 door Off Road TRD . . .

I have never been able see why Toyota thought that particular combination of letters was a good idea. I can only come up with one way to pronounce it as a word.