My late Christmas present.

Peter Person

501 Club
My wife and the boys surprised me with a Christmas present that finally came in this weekend. I got a photo of one of these on Christmas day but picked up the real deal on Saturday.
Husqvarna_346XP.jpg


Husqvarna 346XP with 20" bar.
This beast cuts wood fast! The red oak round that it is setting on is about 30" diameter. Cut through in less than a minute.

Rudi - These two slabs have your name on them!

Peter :D
 
You know, if you want to come to Michigan for a vacation, you could bring that with you and I will make sure that you get it well broken in. :mrgreen:
 
Those are very fast cutting saws, the 20 inch bar can be a back saver too. We have been cutting a lot of wood from the October storm so far about 12 cords cut and split, about 5 of those dry and being burned.
 
Very nice saw. I just gave my son a Husky. I bought it last spring but now that we had to sell the farm I no longer need it. It was a real cutting fool and a pleasure to use.
 
I have one of those myself and they are screamers that's for sure. I've wondered many times what the rpms are once they're adjusted after brake in time. Got to be out of sight.... :{_}:
 
Peter:

Now that is a very nice Christmas present :D Nothing nicer than a tool you want/need and a good one to boot :!: Husqvarna's are very very nice saws.

Them slabs look real nice :{_}:
 
Love them husky's. No one around here use's them or works on them, so i go with stihl. which is as good. I also like jonserod. i was raised on them.
 
I have the same model. I never knew how hard all those other saws had been making me work for all those years!
 
John:

My father-in-law loved his Pioneers and later his Jonsereds. My Granps loved his Pioneer and McCullough chain saws - which I never got to play with. They were huge :!: I got to use the axe :lol: I became pretty familiar with the Jonsereds as those are the ones Dad/FIL taught me how to cut wood with. Electrolux bought Husqvarna in 1978 :big say what: yeah.. Electrolux :!: And in 1979 Electrolux bought Jonsereds AB in Sweden and Skil chainsaws in the US.

I found this out when I was doing my research on Roper and AYP Lawn and Garden Equipment. Kinda surprised me, but makes sense in a globalization scenario:

[url=http://corporate.husqvarna.com/?p=about&s=history&t=timeline&u=detailed&afw_lang=en:mezfakuq said:
Husqvarna Detailed Time Line[/url]":mezfakuq]

1979
Acquisition of Jonsereds AB in Sweden and the Skil Corp operations in hobby chainsaws in the US, Jobu forestry products in Norway, and Pioneer Chain Saw Corp in Canada.

1978
Electrolux acquires Husqvarna. Acquisition of AB Partner in Sweden, which produces professional chainsaws and has subsidiaries in Norway and the US. Power products now include chainsaws, motorcycles, lawn mowers and cutting machines, with total annual sales of SEK 531m.

My buddy Bruce who does a lot of cutting for me now that I can't anymore used to use Jonsereds but now uses Stihl's exclusively
 
Yogie":36xrtqp2 said:
I have one of those myself and they are screamers that's for sure. I've wondered many times what the rpms are once they're adjusted after brake in time. Got to be out of sight.... :{_}:

Yogie,
The dealer I got the saw from states 14,700 rpm. They want it back after 10 hours of use to go through and make sure everything is right.

Peter
 
I been cutting with husqvarna chainsaws since 1979. I keep the saw chain razor sharp all the time. When i gas them up i run the file across the teeth at least once or twice to make sure there still razor sharp. Husqvarna chain saws have a very high RPM so keeping the saw chain sharp is very important. After each day of cutting i lube the bar nose sprocket bearing, sharpen the chain and check the depth on the rakers and clean the air cleaner. These are the best from sweden.

The Johnsereds and the husqvarna's are manufactured in the same building. Some of the discontinued husqvarna's were changed from an orange color to red and sold as Johnsereds in the past not all of them just certain models like the Johnsered 630 was a 372 husqvarna at one time. Husqvarna also owns poineer, partner and poulan too. My poulan tree trimmer is a discontinued husqvarna too.

Note; I only use husqvarna two stroke oil for the mix too. These engines have chrome lined cylinders and chrome rings with a very high compression / tolarences so using the manufacturers oil is very important. I never wore out a husqvarna chainsaw but i did have many so called wood cutting partners quit when they couldn't keep up to me with my husqvarna chain saw. I have the trophy's and 1st place blue ribbons that i won at country fairs in speed cutting with my 100cc, 2100 husqvarna chainsaws too. My best time was 17.5 seconds that doing 6 cuts and boring two holes straight in, in a 9''x 9'' timber.

Husqvarna manufactured the fastest dirtbikes on the planet even today. If you put an experienced rider on an older husqvarna dirtbike today good luck in catching him. These bikes would do well over 100mph. trust me we know. The kawies kx250's would top out at 85mph. There experience in manufacturing dirtbike engines was turned over into the chainsaws and it shows.

After loggin with the husqvarna chainsaws we wanted to try the husqvarna dirtbikes since we heard so much about them and the swedish quality. I restored 25 vintage dirtbikes and we rode the snots out of them. We had a blast.
 
Back
Top