John *.?-!.* cub owner
501 Club
When I was in my mid teens my grandparents had the family farm a few miles form where I lived, plus also had a house in St. Anns, Mo., which at that time was a middle class community in St. Louis. They would spend quite a bit of time at both places, and one day Grandpa called from St. Anns and said they were going to stay there for a few months and wanted Dad and I to take his Gibson tractor to a neighbors just across the highway from his place so no one would steal it. It was in pretty good shape at that time, but here is what it looked like the last time I saw it a few years ago.
Dad and I drove over there, and the first thing we found was a flat front tire. We got out our old faithful IH spark plug tire pump, and tried airing up the tire, but it would not hold air, and closer inspection showed it was split, so we decided to drive it across the road flat. As you may have noticed, at sometime the original tiller steering had been replaced with a steering wheel and gear assembly from something. and with the flat tire I immediately twisted the spokes off of the steering wheel. So I got the vice grips out of our toolbox and put them on the shaft, and started out using them to steer with. That drive train uses a v belt system for a clutch that if adjusted correctly has an over center arrangement that snaps in to hold the belts tight, but it was out of adjustment, so I was having to hold the clutch up with my left foot. So I am steering with the vice grips in my left hand and my left foot hooked over the clutch , when the throttle cable breaks. Now I am going down the road using my right hand to hold the governor open, my left foot hooked over the clutch to keep it moving, my left hnad holding the vice grips to steer, and my right foot hooked under the frame to hold ME on. And Grandpa was worried about someone stealing it. :lol:
Dad and I drove over there, and the first thing we found was a flat front tire. We got out our old faithful IH spark plug tire pump, and tried airing up the tire, but it would not hold air, and closer inspection showed it was split, so we decided to drive it across the road flat. As you may have noticed, at sometime the original tiller steering had been replaced with a steering wheel and gear assembly from something. and with the flat tire I immediately twisted the spokes off of the steering wheel. So I got the vice grips out of our toolbox and put them on the shaft, and started out using them to steer with. That drive train uses a v belt system for a clutch that if adjusted correctly has an over center arrangement that snaps in to hold the belts tight, but it was out of adjustment, so I was having to hold the clutch up with my left foot. So I am steering with the vice grips in my left hand and my left foot hooked over the clutch , when the throttle cable breaks. Now I am going down the road using my right hand to hold the governor open, my left foot hooked over the clutch to keep it moving, my left hnad holding the vice grips to steer, and my right foot hooked under the frame to hold ME on. And Grandpa was worried about someone stealing it. :lol: