"modern" help

ScottyD'sdad

501 Club
My neighbor went to the hardware store, yesterday, and found the owner outside, bent over wheelbarrow, muttering "Navy words". He was reassembling a wheelbarrow, that had the bolts and nuts,upside down, sticking UP, in the tub. The assembler obviously needed a nose ring, to steer him. Ed
 
An excellent teaching opportunity! Need to bring the youngster back to correct his "mistakes". Next time he'll get it right.
 
Well at least I know what those Navy words he was mutterin were :lol: :-:-): And yeah.. it would have been a good idea for him to take the youngun (I am assuming) by the elbow and walk him through the reassembly so that he might actually learn something. Obviously pictogram assembly instructions were a bit too intellectual for that youngun :big give up:
 
We were all Y an S (young and stupid) in our lives. What makes the difference is if you show the person who assembled it, and they corrected their error, and learned from it. That's what makes the difference.

Hank
 
Just a quick addition to this thread. Today a service technician came to the house to replace the transmission in our washer. This was not a kid but a man 35-40 years old who has been doing this type of work for at least 9 years. He had to remove the drive pulley so he put a box-end wrench over the nut on the shaft and started beating on the end of the wrench with a hammer. It did move a little. I watched for a second then asked, "Are you sure that shaft and nut have left handed threads?" He thought for a second, mumbled something, then started beating the wrench in the opposite direction. The nut quickly came loose. I kept a close eye on him as he did the rest of the job. I guess we can all get confused but this really shook my confidence in his ability to do the job properly.
 
Back
Top