Minimum size gantry crane.

grunt

Well-known member
I am in the market to buying a gantry crane and wanted to know if I could get by with one rated for 1000lbs. The heaviest thing I plan to use the crane for is restoring a Farmall M. So I guess what I am asking is how much does a motor for a M weigh and would this crane lift it? I am assuming that, that is the heaviest single part of the tractor.
Thanks.
 
I wouldn't have a clue about the M weight but you surely can't go wrong with the 2 ton. Good luck. Grump
 
grunt:

Is this what you mean by a Gantry Crane?

143909_lg.jpg


Wesco Lever Adjusted Gantry Crane — 2-Ton Capacity

Like David, I would think 2 tons would be adequate for that size tractor.
 
When I first saw this thread, the other day, I thought the 1000# to be pretty small. I agree that the 2 ton model should serve you well.
 
Farm Equipment Guide: M weighs 4964 lbs. Super M weighs 5898 lbs.

My dad made one from wooden beams. Used it a couple of times to split a 77 Oliver. Sucker was really heavy. Took a lot of effort to move around by hand.

I have use a cherry picker/shop crane to pull, move and reinstall the engine from a WD Allis.
 
If you have a torch and a welder, you should be able to build one cheaper. I built mine for 600 bucks 4 years ago. Mine isn't on wheels, but slides easy enough. I had an engineer spec it out and calculated nearly three tons.
 
Back
Top