Mahindra 3505 DI Purchase???

Peter Person

501 Club
I have an opportunity to pick up an early 2000ish Mahindra 3505 DI tractor, 4 speed with H & L.
200X Mahindra 3505 DI.jpg
1,600 hours, one cylinder has one or more broken rings and the sleeve is scratched. Tractor runs. Going to have Aron give it a shakedown cruise this weekend to see if it's worth offering on.
Original tires all around that are in really good shape for being 20 years old.
Bucket Loader
Curtis Cab
3pt Hitch

Looking for opinions on what it's worth.

Thanks,
Peter
 
I did a search on several sites, only came up with two tractors, neither of which had a loader or cab. Both had between 650-700 hours.
One in really nice shape, stored indoors, $7,850.
One in similar condition as the one I’m looking at, $3,900.

Will be used to move snow piles, maybe get a plow set up, handle firewood, turn the compost pile, move heavy objects....
 
be careful that you can buy parts for it, many of these imports parts OBS the parts after a few years, not like cub parts, I would ck to see what is available 1st
 
tst":3kzm2fqu said:
be careful that you can buy parts for it, many of these imports parts OBS the parts after a few years, not like cub parts, I would ck to see what is available 1st

Checked Mahindra’s parts website and I see a lot of engine, transmission, and other parts still available. Can even buy a brand new engine for $8500. :shock:

Good point though, Tim.
 
For what it is worth I have a 2012 50 hp Mahindra (5035) that I absolutely love. Mahindra is the number 1 selling tractor worldwide, just not in the US. SO the downside I see is very few dealers close by to me. However, I do most of my own work, so I order parts off the internet, I think you would have the same option for most maintenance. Really tough tractors, mine is Hydrostat, and I love the power it puts to the ground.
 
Not my cup of tea, but might be pleasurable for you!

Comes with a fancy pink loader!

They are all nice when they work! But......

I remember a guy my brother worked with had a Kubota and some part failed (think it was a hydraulic pump)!

Kubota did not have one in their parts inventory here state side, so he had to wait around 30 days while they shipped one over on the boat! :(

Good luck!
 
outdoors4evr":z29abiuj said:
So... The piston ring doesn't need to be fixed?

We need to take the head off and see how much we need to replace. Could be just hone the sleeve, replace the rings, new head gasket, and call it good. I might use the tractor 20-30 hours per year.
It starts right up and doesn’t make any unusual noises.

Peter
 
SONNY":y3zrp6hu said:
The more you run it that way,--The more damage you will do to the motor---- keep that in mind!!!

Sonny - Completely understood.
It won't be used again until we open it up. We ran it for about 30 minutes last Saturday setting the two posts, then parked it.
Thanks,
Peter
 
Hope you wont find much damage in the motor and it will be an easy fix! These motors can get expensive to fix nowdays! lol!
 
SONNY":3n5rtszw said:
Hope you wont find much damage in the motor and it will be an easy fix! These motors can get expensive to fix nowdays! lol!

Yup, I can buy a brand new complete engine for $8,000 :shock:
 
Thought I had updated this thread with what Aron and I ended up doing to the engine last winter.
#1 cylinder: piston was in rough shape and the wet sleeve was scored a little. Did a bore check and sleeves were still pretty round. Decided to hone the sleeves, new pistons and rings on all 3 cylinders. Completely drained and flushed the fuel system, cooling system, oil. Rod bearings were in decent shape, valves as well. Cleaned up the head and put a new head gasket on. New oil pan and valve cover gasket. Completely flushed the air cleaner as it was really nasty. Radiator was clean so we made sure the core was free of debris. All new filters and belts. After reassembly it started right up and ran great. Still need to flush the hydraulic system.
Fast forward to the fall when we redid the strawberry bed. Boys & Bride wanted me to use the loader to move the new dirt into the bed. Tri-rib tires made some deep ruts so back to wheel barrows and shovels. Nobody happy!
Christmas present from the boys;
Harvest King Industrial F-3 11L-16 tires and new 8” x 16” wheels.
0A67A9AF-7F99-4978-A1E1-ABB0520416C6.jpeg

Plywood is to increase the bucket size for moving firewood to the house.
 
Back
Top