Lumber Prices

Eugene

501 Club
Been putting off several construction projects due to lumber prices. Local prices up 200 to 250%. Advertised prices vary a bit, $10- for a 2x4x8. Add in the sales tax and my travel/transportation costs. Expensive.

Have standing, decent sized Virginia red cedar. Need 6x6's for vertical supports for son's deck expansion. Cost of pressure treated 6x6's would pay for the purchase of an Alaskan saw mill.
 
I run a home repair and remodel business. Lumber prices are out the roof. I was picking up some materials the other day and a sheet of osb 4x8x7/16 was 48 dollars a sheet. A year and a half ago they cost 6.50. A box of nails for my trim gun that was 27 dollars a year ago are now 47. I’m amazed that any new houses are being built right now and kinda surprised that my workload is still where it’s at. I’m in the same boat as you in that I have several building projects at my farm that I’ve had to put off because of prices. I’ve been looking for a bandsaw mill for over a year and the wait time for a new mill is 6 plus months and used mills are bringing new mill prices if you can even find one. An Alaskan mill would work great for milling a few 6x6’s and eastern red cedar heartwood will most likely outlast pressure treated yellow pine. Depending on your local inspections department it might not be worth the hassle to use non grade marked though
 
Mht":1lpkkz38 said:
I’m amazed that any new houses are being built right now and kinda surprised that my workload is still where it’s at.
Linn, Mo. is the home of the State Technical College of Missouri. State Tech is expanding along with the student population.

Most new construction has been in multiplex rentals. I think low interest rates are fueling or maintaining local construction.

No local building inspections.

By the way. Send you kids or grandkids to the local tech schools, even if they want to be a brain surgeon. 2 years tech school, about 2 years worth of credit at 4 year university. While at the 4 year university they can pay for their education with the associates degree and still have spending money.

Conversation the other day. Local grandfather had attended is grandson's graduation, heavy equipment operator. Grandson's starting wage, $58- an hour.
 
No way would I do a building project now with these prices!!!

Mht":32w4o9zx said:
Depending on your local inspections department it might not be worth the hassle to use non grade marked though

While I would not want to take away someones right to have a building permit and their "inspections"!

I want the right to decline "permits" and their so called "inspections"!

I have no desire to play the control freak, cash grab game!
 
SamsFarm":wbe34xgw said:
No way would I do a building project now with these prices!!!
I guess that means you’re assuming that the prices will come down at some point in the future? I don’t think I’d hold my breath.
 
I was at local lumber/hardware store and overheard manager talking to a customer a couple days ago He stated he had just gotten new price list, and cost was going to over $20 per each precut stud.
 
I dont believe that the prices are sustainable.

I know life is short, but if everybody quits buying and only buy for emergency repairs, the price would fall like a rock!

I am so glad I am not fresh out of school, trying to make my way in the world with crazy price swings like this (building supplies and ammunition)!

I wish you all well with this! :)
 
Don McCombs":wccj5z4g said:
SamsFarm":wccj5z4g said:
No way would I do a building project now with these prices!!!
I guess that means you’re assuming that the prices will come down at some point in the future? I don’t think I’d hold my breath.

Your thought crossed my mind...along with the phrase: “new normal”. Sure hope I’m wrong.
 
It’s not just lumber. My nephew works for a a large plumbing supply outfit. In January a tractor trailer load of pvc pipe would cost a customer 10k Current cost to a customer for that same tractor trailer load of pipe is 46k.
 
I purchased a property tax lien on a house in August 2020. I will get the Collector's Deed in late August 2021, unless the property owner and one lien holder pay my cost, plus 10% for my initial payment, and 8% for my additional costs.

Son and I did an initial assesment of the property. Estimating $30K to $40K to bring the house up to marketable standards. That would leave us $20K or more profit.

Currently, additional material costs would negate any profit. -- That's considering current market values.

I currently have several options. 1) Local city will perhaps accept the property as a cost free gift to build a park or water tower. - OK! I lost a couple of thousand. 2) Pay a bit more property tax and return the property to the county. - Still lost a couple thousand. 3) Clean up the house and property, waiting for construction material prices to come down and property values to increase. This last choice could get very expensive considering I would have to put insurance on the property, pay taxes, and improve the property while waiting.
 
Don't forget the potential for vandalism of an unoccupied house for #3. You may not even be able to insure an unoccupied property.
 
Was having dinner yesterday with my brother-in-law who works at Home Depot in the commercial building department. I asked if he's seen a drop recently in material and lumber due to inflated prices. He said that's not what he's seen. Builders are still buying and building, passing the cost along to the owners. He said people who flip houses are now paying inflated market level prices on run down homes--due to the tight real estate market--and then have to buy materials to fix them up at inflated prices, which dramatically raise the price of the end product. Faced with that, many have chosen to go ahead and build new houses.
 
Stanton":2439jglh said:
People who flip houses are now paying inflated market level prices on run down homes--due to the tight real estate market--and then have to buy materials to fix them up at inflated prices, which dramatically raise the price of the end product.
Son and I have been looking for a fixer upper house for a while. Found one near my house. Talked to the owner. She wants $56K for it.

Research. Tax Assessor's office for a copy of their sheet on the property. It's a one story car garage that was split off the original property, no basement.

Using the Assessor's sheet on the property to figure out the assessment value. $26K, that's pretty close to the actual value.

Next topic. Several months back the County Assessor had an article in the local paper. Assessor suggested visiting his office before purchasing a house because people were paying greatly inflated prices for real estate. End result is that because people are paying inflated prices for real estate, property taxes are going up.
 
Eugene":28o3d1ay said:
Stanton":28o3d1ay said:
People who flip houses are now paying inflated market level prices on run down homes--due to the tight real estate market--and then have to buy materials to fix them up at inflated prices, which dramatically raise the price of the end product.
Son and I have been looking for a fixer upper house for a while. Found one near my house. Talked to the owner. She wants $56K for it.

Research. Tax Assessor's office for a copy of their sheet on the property. It's a one story car garage that was split off the original property, no basement.

Using the Assessor's sheet on the property to figure out the assessment value. $26K, that's pretty close to the actual value.

Next topic. Several months back the County Assessor had an article in the local paper. Assessor suggested visiting his office before purchasing a house because people were paying greatly inflated prices for real estate. End result is that because people are paying inflated prices for real estate, property taxes are going up.

Yeah, the real estate market is so tight right now, that people are paying inflated prices to get what they want (i.e. a house). They're not considering the higher taxes down the road. Some houses in KC are being bid on during the realtor process with houses selling for far more than the original asking price.
 
Same thing happening in CT. NYC folks are snatching up almost anything at ridiculous prices. Friend of my son Aron bought an 1,100 sqft ranch on a 60' x 100' lot - $250,000.
A year ago people were fleeing CT!
 
I have a few 100 cc chainsaws and I just ordered a 36” bar with a milling chain. They have 42”/52” bars too. I need the Alaskan saw mill next. I have trees to take down.
 
Stanton":228bg20j said:
Yeah, the real estate market is so tight right now, that people are paying inflated prices to get what they want (i.e. a house). They're not considering the higher taxes down the road.
Week ago, local newspaper article by the County Assessor. Real Estate property taxes are going up. Assessor estimates that the county will take in 10% more in taxes for this year than the previous year.

Today, conversation with County Collector. Trying to figure out how to pay the property taxes on real estate gifted to a government entity. Any way, the County Collector started out by adding another 10% to the previous year's property tax bill.
 
SamsFarm":1b9srg2o said:
Ahhhh, property taxes........ The punisher tax..... Where you get punished for owning land / house / etc.

And.......

The nicer you make it the more you get punished! :(

Are you getting your moneys worth? DEFINITELY NOT!!!!!

Let's remember the Forum rules, boys. Just don't want this thread to stray into a political direction. A no-no on here.

Keep it straight...keep it straight. :wink:
 
Back
Top