Long sickle bar rivets?

[Paul Van Benschoten]

A couple of weeks ago I asked about the the end section for a sickle bar mower. Now I need long rivets for the other end.

I had bought the sections and rivets from Tm Tractor. The four sections at the knife head need longer rivets. I don't see them on TM tractor.

Where is a good place to get them from? I tried tractor supply and my local ACE store but I haven't found any.

 

[Don McCombs]

This might be helpful. Also try Webb Sickle Service.

 

[Bob McCarty]

Agrisupply has them (#20215). Their long ones are 15/16" but will work fine.

 

[Don McCombs]

Agrisupply has them (#20215). Their long ones are 15/16" but will work fine.

You can cut them down to 3/4 with a bolt cutter, to make them easy to set.

 

[Don McCombs]

Easier to access…

 

[Glen]

Hi,
If you're not near the places mentioned above, Case IH dealers might still have some parts for the Cub 22 Mower.

 

[ajhbike]

I got my long ones at Tractor Supply...I am pretty sure it was a packet of mixed length rivets that worked for my SC and JD sickles... (and then I bought the bolts and life is grand!)

 

[lowgearfarm]

I got the longer rivets from TM Tractor. The trick was that I had to ask specifically for the longer rivets because otherwise TM just sends the shorter ones by default.