Log Candle

cowboy

501 Club
I saw a post by someone about a inside out candle. And thought it looked really cool.

You take a dry log. Drill at least a 1" hole in it strait down but not all the way through the log. Then a second hole threw the side connecting to the first hole. Melt wax in it and light it with a torch (I used diesel fuel as that was all I had) The hole ends up becoming a chimney drawing air through it to keep the fire burning. And depending on the size of the log can burn for a hour or three.

Here's the link to the pictures that showed me how to make it.

http://picasaweb.google.com/nutfool/Ins ... bulyoycRA#


We tried it this weekend UP north and it was great! We forgot the drill at home. So my brother bore cut them with his chainsaw

IMG_1273.JPG


The birch worked out the best. The log to the front was maple but still a little wet. The spruce log worked well and so did a cedar.

IMG_1275.JPG


Once the candles burnt mostly up we made a bonfire out of them

IMG1285S.JPG


My friend Scott and brother Tommy and I. Were up with them until at least 1am when we ran out of beer.

IMG1287S.JPG


Billy
 
Thanks Vince

Eugene I had a ash like that this year. Unfortunately I didn't see any wire until after I started cutting.

Bill just trying to keep up with you.

Cool Mike let er rip!

Billy
 
Cowboy":289e3qg9 said:
Eugene I had a ash like that this year. Unfortunately I didn't see any wire until after I started cutting.
Same here. Must have been hog tight wire. I cut below where the saw hit the wire, thinking barbed wire. Didn't work. Sure dulls chain saw blades in a hurry.

There is a chemical that is supposed to rot stumps. Drill a bunch of holes, pour in the chemical, let the stump rot. After the stump rots, drill the vent hole, soak with kerosene and light on fire. Tried this on several stumps with no significant luck. I think the center hole, 1/2" in diameter for the chemical, may not be big enough. Any way, will try with larger diameter center hole.
 
Cool Ron

Enjoy :{_}: :{_}: :{_}:

Eugene

It was big ash I cut for my neighbor so I do not have to worry about the stump. But its a good thing I have a electric sharpener. There's a lot of teeth on a 32" bar.

Billy
 
I have a big one that I've tried several to burn out but no luck. The last time I drilled several holes and filled them with ammonium nitrate and diesel. Next time I try that I'll use a shotgun shell instead of a match. :twisted:
 
DanR":2obw0lde said:
I have a big one that I've tried several to burn out but no luck. The last time I drilled several holes and filled them with ammonium nitrate and diesel. Next time I try that I'll use a shotgun shell instead of a match. :twisted:


Lucky you are still here!!!!!!!!!!!!!!!!!!!!!!!!
 
Eugene
Hollow out the center or drill holes in it, then soak it in diesel, then cover it with black plastic. Forget about it for a few weeks, let the fuel and the sun work on it. Then light it.
 
Cool Dan

Sounds like when I went ice fishing. First I drilled a hole in the ice. Then as usual I taped the tnt to a rock lit the fuse and dropped it in the hole. Doggone ice broke up and I almost drowned :!: :shock:

Billy
 
Cowboy":10l28ths said:
Cool Dan

Sounds like when I went ice fishing. First I drilled a hole in the ice. Then as usual I taped the tnt to a rock lit the fuse and dropped it in the hole. Doggone ice broke up and I almost drowned :!: :shock:

Billy
Hope your truck wasn't parked too close.
:lol:
 
Back
Top