A
Anonymous
Guest
Last yr with a friend of mine we started using cable instead of chains to pull logs in the woods. Works great!! Cables are much lighter, plenty strong and slide throught the weeds easy. Only thing was if your pulling in a confined area your length is fixed unless you carry several different length cables with you. So an idea :idea: came up. I went to the junk yard and got a stub axle off a rear wheel drive car and a wheel ( the ones with the about 1" holes all around ) and then made a reciever adapter to mount this contraption into a standard 2" reciever. Earl made a pin stop to enagage the wheel. Maybe by now your getting the idea :idea: . The wheel is the reel :lol: . We even welded a spinner knob on the wheel to allow easy windup. So here's how it works ( and great BTW ). Back up to where you need to start the pull. Pull back the pin stop and walk to the log and secure the cable. Now just wind up the slack and pin it. Start to pull the log. If you need to stop and back you can just reel up the slack again pin it and continue pulling. Keeps a large amount of cable handy and knot free. I'm using a 15 or 16" wheel ( I forget the actual ). The axle is off a midsized car and I have no idea how punishment it can take but I figure it must be pretty strong to take pot holes and the weight of the car. This axle has an anti-skid brake sensor still mounted on it. Don't think I'll be needing that on this project. :wink: I'll pics up soon.