The original plug wires on older engines, including all older tractors, had a solid copper wire to carry the electricity to the spark plugs. More modern equipment, starting with cars and trucks, has plug wires with a built-in resistance. This change was made to reduce the radio frequency interference coming from the ignition system. It is typically done by making the core out of some material that is an imperfect conductor. For an ignition system to work properly with resistance wires, the rest of the ignition system needs to be designed accordingly. If resistance wires are substituted for solid wires, it often causes engine operation problems. Since cars and trucks have used resistance wires for 60 years or so, people accidentally make the change to resistance wires when they go to a parts store and end up buying generic plug wires.
You could also try taking off your alternator belt and testing your flasher/lights. If they work normally, your problem is related to noise from the alternator. If the problem still happens, your problem is probably from the ignition system.
You could also try taking off your alternator belt and testing your flasher/lights. If they work normally, your problem is related to noise from the alternator. If the problem still happens, your problem is probably from the ignition system.