Jiffy Lube caught on tape!

John Niekamp

501 Club
It's very sad. There's just no work ethic anymore. That same thing happens everywhere even dealerships. It's always a good idea to mark your filters and ask for the defective parts back when getting any kind of service done. It's just sad that it has to be done.

Herb
 
I'll echo John's comments. Do it yourself, know your mechanic or hang around and watch them. Ask questions. Let the service folks know you know exactly what the repairs entail - an informed consumer is less likely to be ripped off.
 
Several years ago my nephew bought tires from a national tire chain and paid $50 extra for tire rotation every 5k miles for the life of the tires. I told him I thought it was a scam.

Just like clock work every 5k miles he would drop his car off for his tire rotation on his way to work and pick it up in the evening. After a while his front tires were showing wear while the back tires remained good. He said they have to be rotating them because the car is in a different spot when he picked it up after work. I told him the next time to mark his tires on the inside side wall so they wouldn't be noticed then check them when he picked it up in the evening. That night after work his car had been moved. He check the tires for his marks. The tires had never been rotated the marks were all in the same spot. He brought out the service manager to show him. The service manager came up with every excuse including that the car had been put in the service bay at lunch time and the guy came back from lunch and thought it was done BS. My nephew let him know that he knew he had been scammed all along and wanted his $50 bucks back. He got them back and has been buying tires from a local dealer in our small town ever since. Not only did they lose the easy $50 they lost any hope of future tire sales to my nephew and any of his friends and coworkers.

I guess in a small town they can only get away with it once then everybody knows. In the big cities there are plenty more fish to fry.
 
Buyer beware, when I was in college I dropped my ford ranger off at the local ford dealership to have the valve cover gaskets replaced as they were leaking and dripping oil down the sides of the engine and burning it. When I went to pick it up, the work had not been done and they explained they didn't want to start on it because it required what they called a complete engine overhaul. The truck only had 75,000 miles on it at the time. It was still running perfectly when i traded it in at 125,000 miles.
 
John:

It just goes to show you... you almost can't trust anybody anymore. We have these types of scambuster programs on tv every now and then. CTV W5 and some of the other networks up here do them and it really opens your eyes.

You can't even trust your dealer.. you have to watch em like a hawk. And that I guess is a good thing. It is a shame, but that seems to be the price of progress.
 
Such scams are nothing new. Back in 1972, my brother's '62 Chevy Nova broke down in I-70S (now know as I-270) near DC. It was towed to a local repair shop where they replacing a broken timing chain.

Now, for the rest of the story. 1962 was the first year of the modern GM inline engines as introduced in the brand spanking new Chevy II. GM designed a meshed gear system for timing the crank and cam in the new engine - there is no timing chain, just like a Cub engine. The rest of the GM line up didn't get the new design until 1963 and later. The shop actually replaced the shear pin on the distributor drive and retimed it but billed about $400 for a $10 repair. The considerable grease build up still caked on the engine revealed no such work was performed on the front end and we knew enough about the guts of the engine to refute that bill.

Always be an informed consumer!
 
In our shop we have our work benches where the customer can watch us from the other side of the counter. We like for them to see what we do to their units and frquently show and explain what we are doing. Honesty pays off in the long run. I can't say that I have found any hidden cameras in a starter or alternator yet :D :D :D
 
Lurker Carl":bojs0wiq said:
GM designed a meshed gear system for timing the crank and cam in the new engine - there is no timing chain, just like a Cub engine.
LOL, I had a 63 Chevy pu with the 230 engine that used that setup. the problem was that they used a plastic/nylon gear. guess what. They were more trouble than the chains.
 
Fords "better idea" way back when, was the nylon timing gear in the 360 truck motor. The gear would disintergrate, migrate down to the oil pan, then to the oil pickup screen-- You know the rest of the story. Frank
 
This is why I want to get out of the "business".I seen way to many things go on in my life at a dealership.A lot of good and bad.Ford is in trouble for a reason.I hope to be in a new field next week.I do most of my own repairs.Sometimes I can't.I do know a lot of techs or people that can at least help me.Kevin There are a lot of honest people out there.I just wish the ones that get caught get burned !!!!
 
Speaking of timing gears - I had a 1968 Ford with a 427 (?) in it - one of the big blocks, anyway. It started running bad, and didn't want to start. I found the cam way out of time - due to the plastic covering on the crank sprocket breaking into pieces. The little nubs on the metal part underneath were just enough to drive the chain, but were slipping tooth by tooth. A new gear and chain, and I was back on the road. Simple engine to work on, only took me a couple of hours. What a beast! 3 speed automatic, 60 easily in first, when it hit second it would spin the tires. Had to be careful with it at lower speed with full throttle. 10 miles per gallon, no matter how I drove it, easy or hard. It was a retired police cruiser, and no-one would pass it on the highway, since it looked like an unmarked cruiser. Took me a bit to figure that one out - it was weird, no matter how slow I drove, very few people would pass, and I could get a crowd behind me on the highway. It could easily peg the 120 MPH speedometer, but stopping it was a job - too much car for the brakes.
Ah, the good ole days...
 
A friend of mines son worked at the local Jiffey Lube once he was there for about 3 months and trusted he was told how to make real money. It was a eye opener if I can't do it myself I use the small local guy.
 
One thing we do in our company is the open door policy. We encourage our customers to inspect our decks we are building at any time. Also, for our future customers, we give them the address of the current job we are working on and tell them to stop by unannounced at any time to see how we do our work. Works well for us because we are not scamming our customers. Just like when you go to a restaurant and the kitchen is in plain view. Nice to see whats going on in the kitchen. I think those jiffy lube clowns need to be hung.
 
Shade tree mechanics have been around since the Model T. An easy way to find a good shop is to ask a NAPA dealer. Be specific Ford, Subaru, etc. Also ask the local machine shop where to take your car or truck. I have never been steered in the wrong direction.
 
Is it just my backward way of thinking, or isn't taking money for a service you didn't do, A CRIME. If they catch a bank robber on a video camera and identify him, he goes to jail. I would think this applies as well. You gotta think, most of the people who take their vehicles in don't know the difference and are very vulnerable innocent victims. Hanging is too good for them, They should be publicly flogged with a john Deere battery cable, 6 volt mind you!!! An IHC cable is too good for them!! Sorry, I just kinda lose my patience with these scam artists. :x :x :x :x :x :x :x :x
 
Something that urks me is when you take a vehicle in for a specific service and they do an inspection of your vehicle trying to drum up business. I have been in the waiting room listening to a guy call someone about a car that was in for an oil change and they are telling the owner about all the doom and gloom of the car that needs immediate attention. I have watched while that same car has all its wheels removed and god knows what else in a effort to scam the owner into a big fat repair bill.

And I'll even tell who does it!!! Firestone of Gahanna! Been there watched it. Never went back.
 
These guys are thieves and ought to be prosecuted, plain and simple.

The way to go would be for the TV networks to conduct this kind of investigation on a nation-wide basis, then take the results to some big law firm to pursue a class-action and take 'em down.

Ten years ago I took my daughter and her car to a JiffyLube to prove my point that she needed to know what she was talking about with these clowns, and to be ready to ring the "Bu@@sh@t" bell when they tried to scam her.

Sure enough, the big lug working on her car came back into the waiting room with her tranny dipstick, and showed her the prettiest, pinkest, sweet-smelling dab of tranny fluid you ever saw, and claimed it was evidence she needed to replace the fluid and filter ($60 bucks at the time). She looked at the guy with her big blue eyes, and without missing a beat, told him she might have believed him if the fluid was brown as mud, but that she thought HE was full of mud...and to pull her car out of the bay before she called the police!! I never said a word, but this ole daddy was sure proud of his girl!

Today she runs a pair of auto-repair shops with the female owner, and is in charge of quality control...and she has fired more than one wrench monkey for trying to rip folks off! She's just a little thing, but none of the big dudes ever challenge her! :wink:

Corky

P.S. This is my grand-buddy Tyler's mom!
 
Back
Top