Thanks for the info.tldec50":26cmu1ke said:Stan,don't forget the big washer under the oil filter,they usually stick to the filter and thrown in the trash. They were missing on both of my jd's. It will not filter the oil and have low oil pressure.You have a lot of therapy there but nothing better. Keep us posted on progress
This is a lot like Christmas, I know there are a lot of things there but I have to open each one up to see what is actually inside the package. (I've already found a few angry wasps.) It's becoming more obvious that the PO's son didn't really know much about this one. It could be a bad starter/switch/ground. The engine is obviously not stuck. Quite possible that since it would not turn over with the starter the assumption was made that the engine is stuck.John *.?-!.* cub owner":j52trjmt said:If you could turn the crankshaft 1/4 turn that most likely indicates a stuck valve or valves.
Thanks John. I guess I should pull the valve cover and see what's underneath. Probably needs cleaning up and lubing the mechanism because of water getting in down the exhaust.John *.?-!.* cub owner":2fne5knp said:If you could turn the crankshaft 1/4 turn that most likely indicates a stuck valve or valves.
staninlowerAL":3e7pe99i said:Finally got a little time to work with the M. Rear tires are not worth salvage (see picts at the first post). tractordata.com shows OEM tires are 8-24, it currently has 9.5-24, I've seen some info about 11.2-24. It has 5.00-15 on front. Any thoughts on what will give the most balanced appearance? seems like the 8-24 will be too skinny. The 9.5's don't look too bad but seems like anything larger would be overkill unless I could increase the size of the fronts. I've seen some info that 16 inch on the front was an option, probably also larger rears were optional. I don't have an Owners Manual to check this. Any thoughts? TKS.