Has anyone out there put a 13-in steering wheel on a Farmall Cub with a 3/4 in keyed shaft reason is I'm a short fat guy and it's hard to get on the tractor with the stock steering wheel
Not the answer you want but there have been some posts about about rear/forward adjustment to the seat mounting. Seems as though there also was a post about altering the length of the steering rod. Stan
If it is a 64/65 and later, with the longer steering shaft, there are also posts about shorting the steering shaft. I have done that on 2-3 cubs. That gives you a bit more room.
Do you have a pan seat or the deluxe seat? If you think that is tight, I have some Cubs with 18” steering wheels and the deluxe seat. Now that is tight!!
