J B Weld question

Dan Stuckey

Well-known member
Big boo boo today. Dropped my Stihl from up 20 feet in a tree. The gas tank now has a small, thin crack. This tank is a hard plastic and molded into the main handle. Would JB Weld handle this type of repair. I can pry apart the crack a bit to force some of the weld into it. And don't drop you saw, called the dealer about a new piece and wow, 150 bucks, just for the part, and I install it. Thanks for you help.
 
I don't know whether JB Weld will work. My brother-in-law sells and repairs chain saws, tillers, lawn mowers. He often takes a trade-in and makes repairs to resell if possible. Some aren't worth investing money in so he sells used parts. I would suggest that you try saw repair shops and maybe get a good used tank at a reasonable price. Dan
 
I don't think JBWeld will work. The plastic tank and JBWeld will not flex at the same rate - it will seperate or crack. Also, JBWeld will not 'melt' the plastic and create a unified bond with the tank. There is the possibility of additional damage to the tank that isn't obviously visible.
 
Jb wled doesn't stick to the type plastic gas tanks are made form. You can get a plastic welding kit form places like harbr freight, but my suggestion would be try a saw shop for a used one, or a new one. You don't want the surprise of a leak and fire.
 
Hey Grump,
See your from Bedford. I'm in Altoona but spend thursday through sunday in Bedford at Friendship Village. Have a seasonal site there.

As to the chainsaw, I have a 028 WB model. Have been checking Ebay and can get parts there pretty cheap. Passed up one last night that went for 35 or something like that. Did try the JB Weld for grins to see how it works. Waiting for it to cure for another day. Figured I had nothing to lose. Our dealer here did say around fall he usually gets stocked up on junk saws and might have one there. He too said he waould have a hard time buying a new tank at that price.
 
It sure is a small world, my wife and I camp at Friendship Village often. Moving another Cub to the new place tomorrow, sounds like we need to have a mini-Cubfest!
 
Carl,
Next trip to FV, look me up. I'm in the new section, site 218 on the hill. A tan Park Model with "Stuckey" on the light post. We're there most weeks from thurs to sun. Will be either a silver f-150 or a Lexus suv in the drive if we're there. If you don't see us, ask either campers beside us and they usually know our where abouts.

Dan
 
Chances are it is a nylon material. You can weld it with a soldering iron with a 1/8 wide flat tip . Since it is not glass filled nylon like radiatior end tanks it is a pretty easy fix. Be sure to heat the iron up a hot a possible, we injection mold nylon, barrel temp. of 450F When you weld be sure to start pushing material from uncracked area to crack, This will be giving you material to keep pushing ahead, make small pushes of material over and into the crack about 1/16 -1/8" intervals You will be moving over the crack.
. If you have an old tank laying around you can cut small thin strips to use as a welding rod ,for added material. When you get done it should look like a weld similar to steel, I have done numerous fixes , being in the prototype buisness we make changes to plastic parts regularly. Practice on a scrap piece of plastic to get the hang of how the material flows,when you start.
PWL
 
Dan

I have used a product called Sealall.It is in a yellow and red tub usually hanging on a card packet.I have used it on gas tanks on cars many times,I am not sure it will wok on plastic.But it will tell you on the package.You can pick it up at an auto parts store.
8) :) Bruce
 
Back
Top