intake hose

technova

Well-known member
I have a replacement carb on my Cub with a 1 5/8" OD and the original tube from the air cleaner is 1 1/2" OD.
I previously removed the air cleaner and ran a K&N right on the carb. That got lost when I moved and I would
like to put the air cleaner back on. I cannot find a hose to fit.
Any ideas on a short hose to adapt top these two sizes?
 
So, the part form TM replaces the rubber hose at the carb, the steel pipe up to the air cleaner and the rubber hose at the air cleaner?


I do not remember what the part number for the K&N filter was. An old parts guy I worked with looked it up in a catalog before the days of computers.
It was a clamp on tapered cone that just fit in lengthwise. I have not been able to find it on K&N site or Green Filter site.
 
Looks like a K&N RC-2290 or RC-2294 will work on a 1 5/8" diameter inlet, given the specs call for the mounting flange to expand 1/16" to accommodate in-between sizes.

Bill
 
Back
Top