Implement fitting?

[Crawforde]

Hello all. I’m new.
I have recently purchased a 48 cub and my wife found these implements for sale sort of locally.
The owner knows nothing about them. Had them as lawn art.
The price is nice enough to tempt me drive a few hours if they are decent implements that will work with my machine.
I do not have a fast hitch, just a swinging drawbar.

 

[staninlowerAL]

You can probably tow the disc but it will not do much work without some additional weight and adjustment to the angle of the cut. The plow in the rear of the picture looks like a 193 moldboard but can't really see if it's missing some parts (which are VERY hard to find separately). You can take a look at attachments/implements by visiting TM Tractor (forum sponsor) website to see what should be included with a complete assembly. Also Don McCombs recently posted a classified add that showed one for sale with all the needed parts. JMHO Stan

Thread '**** FOR SALE: Complete Cub-193 Moldboard Plow Setup **** SOLD'

May 18, 2026

I have for sale a Cub-193 moldboard plow with all the components required to install and operate it. Everything is in good working condition and ready to use this season. Price is $200. Wheel weights are NOT included in this ad. Can be picked up in Loch Lynn Heights, MD. Delivery is also possible to The Cub Tug in Somerset, OH the first weekend in August. DM me with any questions.

• Don McCombs
• Replies: 3
• Forum: The VINE

 

[tst]

disc is not for a cub but might work, kinda looks like a rear half of a bigger unit, looks heavy duty, plow cannot see enough of it to tell if its for a cub, could be for a super A

 

[Crawforde]

Thank you!
That one of Don’s looks nice. it’s a shame it’s so far away. I’m in northern Michigan.
I asked the seller of this one for more pictures.
This is it. I’m not sure what I’m seeing. I’m not in any rush and there are some local groups to join and check out where I may find some info and leads.

 

[Glen]

The plow and disc aren't like any I've seen in the Cub implement manuals.

 

[Don McCombs]

Neither are Cub implements. The disc could be pulled by a Cub, but I doubt would be very effective. My advice is to keep looking.

 

[Crawforde]

Neither are Cub implements. The disc could be pulled by a Cub, but I doubt would be very effective. My advice is to keep looking.

Thanks.
I will. If I still lived in Maryland I’d buy yours!

 

[staninlowerAL]

Thanks.
I will. If I still lived in Maryland I’d buy yours!

Hey, there's always Cub Express! Maybe you could consider that option. JMHO Stan

 

[Barnyard]

That one of Don’s looks nice. it’s a shame it’s so far away. I’m in northern Michigan.

How far are you from Columbus Ohio. bet Don can get it close o you.

 

[Crawforde]

The Cub express sounds cool, we used to do something like that with canoes and kayaks back in the day. Sometimes it took a while but we could stage an old boat across half the continent when needed. That reminds me, I do need to re canvas and replace some ribs and planks on my old wood canoe, but ahe’s probably got another year in before I really have to. Maybe I’ll paint it Farmall red when I get the new canvas on.
I’m about 8 hours north of Columbus.

 

[Board shortener Tom]

The Cub express sounds cool, we used to do something like that with canoes and kayaks back in the day. Sometimes it took a while but we could stage an old boat across half the continent when needed. That reminds me, I do need to re canvas and replace some ribs and planks on my old wood canoe, but ahe’s probably got another year in before I really have to. Maybe I’ll paint it Farmall red when I get the new canvas on.
I’m about 8 hours north of Columbus.

How far are you from Holland? Back when I lived in Muskegon I was getting parts from an older fella who had a lot of small. Internationals, parts and implements. He is a really nice guy and was always good to us when buying from him. I would be willing to give him a call to see if he had anything you might be wanting. Also, I often found items for sale for Cubs/A's not far from west Michigan so you shouldn't have trouble getting the things you need. Just keep watching the classified on marketplace and be patient.

 

[Crawforde]

Thanks. I may take you up on that I’m on the east side between west branch and Mio. There seems to be some availability over here too. There is a local group I’ll join and go to their meeting this week.
Hopefully that gives more insight into what is available in the area.
There are a few shows and events in the area over the next couple of months, many with flea markets so I’m sure something will come up if I am patient.
In the meantime I can try and figure this one out.
It’s from a garage sale down the street yesterday at a “please get this out of my flower bed” price.

 

[tst]

not for a cub

 

[SONNY]

disk is for a David Bradley walk behind !! somebody messed it up and cut part of it off.--ya i got one here!! lol!! Plow--- i have NO idea what that animal would be for but it too has been cut/messed up.--- looks like they tried to just bolt it to the drawbar and that aint gonna plow anything!!

 

[Jim Becker]

Looks to me like a 1-horse plow minus the handles.

 

[Crawforde]

Looks to me like a 1-horse plow minus the handles.

Yea. I think my wife’s idea is that if I can’t make it work on the Cub, she can tie it to me and I can pull it through the garden rows.

 

[Don McCombs]

That’s a good enough reason not to buy it.

 

[Crawforde]

That’s a good enough reason not to buy it.

For less than the cost of a set of spark plugs, if I do mount it and take it out back and can’t get it working the soil well, there is no guarantee, I won’t “lose” it back there and need to get a proper one. I’m too old to pull.