IH refrigerator, need some help

John *.?-!.* cub owner":1896663t said:
have you put a thermometr in the refrig. to see how cold it is getting?

It is -4c in the freezer, and +2c in the bottom. It will get colder the longer I keep it plugged in. It just wont shut off. The new thermostat done nothing.
 
John *.?-!.* cub owner":91k36mrq said:
There is a relay that turns the compressor on and off , it may be sticking. it may be mounted directly on the compressor, or located elsewhere, not sure on that model.

How do I get to the compressor?
 
it's possible that there is an access plate on lower back secured with screws if not then tilt backwards a little looking underneath using mirror if needed. If access is from the bottom and you lay it over, make sure it is upright for a while before plugging it backup to let the oil in the hermetic pot drain back down (1 hour should be good).

1. Assuming thermostat has 2 wires and it is making and braking the circuit on the common leg or Bachelor line. (that is to say it open and closes one of the power cord legs to the wall recepticle which connects to 1 terminal on the hermetic pot called COMMON).

2. The other 2 terminals on the hermetic pot are called START and RUN termininals which the RELAY controls, so I assume since it starts up ok that the relay is good (thats my understanding anyway).

3. If you manually disconnect 1 of the wires at the thermostat it should break the circuit and turn off the refrigerator! (Try it out)
If it does not then follow and check where the wires lead to (color coded i'm guessing).

4. It is an old and neat refrigerator and it may have been disconnected underneath by a previous owner and they connected the common leg or Bachelor line straight to the COMMON terminal to the hermetic pot if the old thermostat was bad?

5. It is hard to say without looking at it and seeing what you have or it's componets.

Good luck tractorfan1 :)
flag
 
Brett:

Have you found the date code on that particular unit? Does it fit into the time frame for that manual?

The only way you will be able to effectively troubleshoot that problem is with a service manual. Even the techs, especially the ones today, will have next to no idea how to handle something of that age. Gonna have to be one of us older folks who actually know what one of them things is.

So far John and Flag have given you great advice. I am no tech, but I do enough trouble shooting to read good tips when I see em. Do what they said, but if you want to be able to continue to use that old fridge, I would be getting that service manual.

Keep us posted...
 
You are right Rudi about needing a book to go by, I have a Doolin's Trouble Shooters Bible 1963 from Doolin Technical College in Texas.
I was only posting what it says, but it would certainly be nice to have a book on the unit in quest.
 
Rudi":a1cjk7co said:
Brett:

Have you found the date code on that particular unit? Does it fit into the time frame for that manual?

The only way you will be able to effectively troubleshoot that problem is with a service manual. Even the techs, especially the ones today, will have next to no idea how to handle something of that age. Gonna have to be one of us older folks who actually know what one of them things is.

So far John and Flag have given you great advice. I am no tech, but I do enough trouble shooting to read good tips when I see em. Do what they said, but if you want to be able to continue to use that old fridge, I would be getting that service manual.

Keep us posted...

The date is 3-17-53. The manual say's for 1949-1952. Would a '52 be the same as the '53 model? I will send the seller an email to see what shipping would be.
 
Brett:

I would think that most of the basics would apply. IH was not known for flipflopping on designs or running amok with new improved (read, not really useful) improvements, so I would suspect that the 52 model would be almost identical or very similar at the least. Be somewhat akin to a 1949 Cub manual applying to a 1956 model year. Most of it would be identical.. some subing would be occuring, but the major components would be the same.

Remember, there is no duty on reading material.. make sure that he labels it as such on the CN-77.

As far as shipping, as long as he charges actuals it should be ok..

But -- and this is only me... I have paid 8 or 9 times as much in shipping for a manual I wanted/needed than what I have paid for it.. ie.. manual cost me $1.99 and $8.50 to ship it.. -- it actually cost them like $1.85.. but that is the way it works at times..

It is still worth it to get a manual that will help solve the problems and aleviating that pesky need to keep buying parts until they are all new, to find out after, that all you had to do was adjust a valve.. or something....
 
Rudi":1ko99frt said:
Brett:

I would think that most of the basics would apply. IH was not known for flipflopping on designs or running amok with new improved (read, not really useful) improvements, so I would suspect that the 52 model would be almost identical or very similar at the least. Be somewhat akin to a 1949 Cub manual applying to a 1956 model year. Most of it would be identical.. some subing would be occuring, but the major components would be the same.

Remember, there is no duty on reading material.. make sure that he labels it as such on the CN-77.

As far as shipping, as long as he charges actuals it should be ok..

But -- and this is only me... I have paid 8 or 9 times as much in shipping for a manual I wanted/needed than what I have paid for it.. ie.. manual cost me $1.99 and $8.50 to ship it.. -- it actually cost them like $1.85.. but that is the way it works at times..

It is still worth it to get a manual that will help solve the problems and aleviating that pesky need to keep buying parts until they are all new, to find out after, that all you had to do was adjust a valve.. or something....

I sent the seller an email, for a shipping quote. Before I sink more money into it, I will have to get a manual. How far away from Moncton are you? I was at Princess Auto today, for a little shopping...
 
Brett:

I was at Princess today, trying to get a few parts... was there from 1:45 to 2:30.... :roll: :oops: :roll: :oops: I am 600 yards from the end of the runways at the airport.. I am in Dieppe.

Here is my cell.. call me next time you is in town.. 872-0927..

Boy wouldn't that be a smack in the head ifn we were both in Princess at the same time and didn't know it... sheesh :roll: :oops: :!: :shock:
 
Rudi":30i93l53 said:
Brett:

I was at Princess today, trying to get a few parts... was there from 1:45 to 2:30.... :roll: :oops: :roll: :oops: I am 600 yards from the end of the runways at the airport.. I am in Dieppe.

Here is my cell.. call me next time you is in town.. 872-0927..

Boy wouldn't that be a smack in the head ifn we were both in Princess at the same time and didn't know it... sheesh :roll: :oops: :!: :shock:

We left Princess at 11:45 and went to Dairy Queen. I cant believe if we would have been there a little later, we could have met! :shock: I entered your cell # in my phone. Mine is 442-0362
 
John *.?-!.* cub owner":x3h01qpw said:
There is a relay that turns the compressor on and off , it may be sticking. it may be mounted directly on the compressor, or located elsewhere, not sure on that model.

Hello John,

Is their a way to unstick it? Or do I need a new relay? TIA! :)
 
Back
Top