IH Carb choke lever

[staninlowerAL]

A little ingenuity and some scrap aluminum yielded this with a good dose of patience. And no, I'm not taking orders to manufacture them. Just thought I would share the end result. I still have to thread and install the clamp screw. Sorry for the orientation. Stan

 

[Bob McCarty]

Nice work!

 

[staninlowerAL]

Thanks, Bob. Coming from you I consider that a real compliment!! This grew out to the "rabbit trail" of what carb/bracket fits on a 154! I've also tried my luck at reproducing the choke rod from 3/16 stock rod. Worked out pretty good, if I do so so!! Stan

 

[SONNY]

looks great Stan!!