I know what it is!

I remember the large funnel (8") with built in church key, no trigger. Used them when i was a teen. The owner of one place I worked had piece of angle with legs (2 long, two short), short pieces of cold rolled welded across the angle to drain spent ammo containers. He used this in his own vehicle, thus never buying new ammo.
 
this one was the "luxury" version :lol: You laid an oil can in it, and stuck the spout in the valve cover then squeezed the trigger. It pushed the can down onto the opener that cut a hole about an inch or inch and a half in the front of the can, plus it punched a vent hole in the side of the can near the bottom at the same time. You better figure on emptying the can all the way when you squeezed the handle, no way to store it. Worked great on metal cans, but when they went to paper you had to use your hand to help push it onto the opener, the handle grabbing the edge would just collapse that side.

opener.jpg
 
RUSSALL":2yj00uzp said:
Would this work in your mystery machine?

SANY0687.jpg



Russ

This ammo works better :lol:
Picture1258.jpg


And this is the predecessor to the one Barnyard has
Picture1256.jpg

Picture1257.jpg


They just dont make them like that anymore :D
Boss
 
I sometimes use one on a can of tomato juice if I have company. Of course it will also work with orange or pineapple juice and with chicken broth.
 
danovercash":2ekmsr3b said:
Anyone have an ammo delivery system involving a glass jar, don't know what happened to mine.
Now you people have just used up part of my day! I'm quite sure I still have a copy of the delivery system in question and have at one time used the older glass jar system. I'll have to look thru my father's "stuff" to see if I brought it here or what and what to do with the "stuff". Vern
 
tnestell":38no93d4 said:
I sometimes use one on a can of tomato juice if I have company. Of course it will also work with orange or pineapple juice and with chicken broth.
Did you clean it good, or just depend on the juice to wash it out as it goes. :lol:
 
I noticed in Boss' picture that it is "PA Approved" and I have seen that in a number of different applications. I wonder why PA has such a lock on approving these things? By the way, I am well over 25, and it took me a little bit to figure out exactly what it was. That is quite deluxe.

Also, Don and others...I love the fact that a bottle opener, frequently used for alcoholic beverages, is called a "church key"...

Mike in La Crosse, WI
 
MikeInWisconsin":3tbb9zbj said:
I noticed in Boss' picture that it is "PA Approved" and I have seen that in a number of different applications. I wonder why PA has such a lock on approving these things?
My guess is that since Pennsyvania was one of the first big oil states back in the 1800's they probably required anything related to oil to meet certain standards. The testing labs may have all been located in the state. Somewhat like the Nebraska tractor testing labs are in Nebraska.
 
[/quote]Did you clean it good, or just depend on the juice to wash it out as it goes. :lol:[/quote]
I bought it somewhere new, maybe 20 years ago still in a cardboard package. Ran it through the dishwasher before using it a deer camp. However I would think if you used it for clamato juice without washing it no one would notice. No wait that comes in a bottle.
 
Bill, I think you're right. My grandfather was corporate secretary for the old Esso Standard Oil Company when he retired in 1955, and worked for Rockefeller from 1919 through the years when they were consolidating all the small companies over most of the northeast and mid-atlantic states. As a little kid I used to sit with him for hours and listen to him recite all the names of the small companies he remembered merging, buying, or consolidating for Rockefeller and his bunch. But Pennsylvania was one of the strongholds....can we say, Pennzoil? Pennsylvania Crude was the gold standard...

By the way, I've got an old esso can (or "round:) that would fit that gun just fine! :lol:

Corky :o)

Barnyard":242jyqu2 said:
MikeInWisconsin":242jyqu2 said:
I noticed in Boss' picture that it is "PA Approved" and I have seen that in a number of different applications. I wonder why PA has such a lock on approving these things?
My guess is that since Pennsyvania was one of the first big oil states back in the 1800's they probably required anything related to oil to meet certain standards. The testing labs may have all been located in the state. Somewhat like the Nebraska tractor testing labs are in Nebraska.
 
Back
Top