Have a bolt/screw in a metal panel, secured with blue thread locker. 2003 Expedition, torx headed screw, stripped out the torx portion of the screw trying to unscrew it. Had to drill off the head of the screw to remove the plastic panel.
Have about 1/2" of threads remaining above the base metal panel and perhaps another 1/2" below the base panel. Tried removing the remainder of the screw with large vise grips, no avail. Don't want to break off the remainder of the screw.
Thoughts, suggestions.
Have about 1/2" of threads remaining above the base metal panel and perhaps another 1/2" below the base panel. Tried removing the remainder of the screw with large vise grips, no avail. Don't want to break off the remainder of the screw.
Thoughts, suggestions.