How to remove blue thread locker.

Eugene

501 Club
Have a bolt/screw in a metal panel, secured with blue thread locker. 2003 Expedition, torx headed screw, stripped out the torx portion of the screw trying to unscrew it. Had to drill off the head of the screw to remove the plastic panel.

Have about 1/2" of threads remaining above the base metal panel and perhaps another 1/2" below the base panel. Tried removing the remainder of the screw with large vise grips, no avail. Don't want to break off the remainder of the screw.

Thoughts, suggestions.
 
From the Loctite web site...

"For disassembly, shear with standard hand tools and remove with methylene chloride. In rare instances where hand tools do not work because of excessive engagement length, apply localized heat to nut or bolt to approximately 482°F (250°C). Disassemble while hot."

As an alternative, you might try Freeze & Release.
 
I spent some time on the internet researching for an answer before posting here.

It will be a few days before I can get back to the project. One suggestion was acetone (finger nail polish remover). Might try both suggestions when it warms up a bit. Shade tree mechanic job. Outside, no heated garage.

I think the heat method may perhaps work. Thought is that the vise grips will form a large heat sink cooling off the screw before I can remove it. Worth a try.

Further suggestions?
 
Assuming that you don't want to apply heat from an O/A torch directly because of paint damage, etc., heat up a piece of rebar or something similar until cherry red. Apply the metal to the exposed stub of the screw and let the heat travel down to the threadlocker. Then, use the vise grips.
 
Clamped vise grips on the screw stub. Used a propane torch to heat up the jaws of the vise grips and screw stub. Came out easily and I didn't mess up the paint or the vise grips.
 
Eugene":36k5n012 said:
Clamped vise grips on the screw stub. Used a propane torch to heat up the jaws of the vise grips and screw stub. Came out easily and I didn't mess up the paint or the vise grips.
Gee, I guess you CAN teach an OOOLD dog new tricks. :lol: Now if I could just learn some.
 
John *.?-!.* cub owner":7e1ffyop said:
]Gee, I guess you CAN teach an OOOLD dog new tricks. :lol: Now if I could just learn some.
It's the old tricks that I have learned and practice. It's the new trick that I have problems with.

Getting old. Short term memory loss. Find something that I think will work. By the time I get to the shop, I've forgotten the idea. No use making notes. Can't find my clip board or if I want to write something down to recall later, forgot where I placed the clip board.

I have 4 sets of keys. Take all 4 sets of keys to the acreage. Have to try all the keys on one set, then the next set, until I find a key that opens the lock.
 
That's what they make these for, Eugene. Us old guys. :D

35054-228x228.jpg
 
Don McCombs":33h0ccv8 said:
That's what they make these for, Eugene. Us old guys. :D

35054-228x228.jpg
What are they for? If they are key tags, I couldn't remember which color went with a set of keys and which locks.

Even if I could remember, I would still have to try each key in the lock.
 
They go over the head of the key on your key ring. Put a dab of the same colored paint on the lock or just write "yellow" on the lock with a sharpie.
 
I know its an old post but....I bought either loc tite or thread locker and hey, it came in a blue tube...I used it on a sight attachment on a 44 Mag Ruger Super Red hawk...And to not get into a long story I had to take it off...I was a little worried and didn't want to heat it if I didn't have to....I read an article about honey...So I bought some honey candles...I dripped some of the residue on the small screws ...To my surprise they backed right out...Now I don't know if the locker did not adhere properly to the thread or the honey worked...But I know the next time I bought the opposite of the brand I had and blue loc-tite or whatever it was came in a blue tube with blue written on it...Make sense...I thought not....Anyhow if you try it don't get the dripless candles...It was a long time ago so I can't be more precise... :mrgreen: ....Dave
 
Back
Top