Help ID this Bearing.

[Cliff]

I need help identifying this bearing. I have a box full of Cub Lo-Boy 154 parts that I bought. There are 6 of these Timken bearing with the built in seal. The Timken part number is,
In the pictures. So far all of the parts in this box have been 154,185,&184 related parts. I couldn't find a cross reference for this bearing in line. I hope some one out there will know where it is used from experience.
Thank you for your time and assistance with everything so far.
Cliff.

 

[staninlowerAL]

Quite a few hits on google by searching timkin LM11900 but none show a specific use. Looks to be a standard size that fits whatever the dimension will accomadate. Prefix LM appears to be light/medium service. JMHO Stan

 

[tst]

11949 is a common trailer bearing , the seal attached to it probably for some custom application, not for a cub

 

[Jim Becker]

Looks like it may be the replacement for the spindle bearing on the 3260 mower.

 

[Cliff]

Looks like it may be the replacement for the spindle bearing on the 3260 mower.

I have a 3260 deck. If that is the bearing for it that will he great. The number of bearings, 6 of them would make sence if the previous owner of the box of parts had bought them for there 3260.
I hope that's what they are for. I was going to rebuild the deck sometime anyway so if these are for it I will be getting it back to new condition for cheep. This box of parts probably had $1,000.00+ worth of stuff in it. Brand new clutch - the fly wheel. Brand new PTO clutch pack. Enough new bearings to redo the front wheels on 2 if not 3 tractors. A new creeper gear main ball bearing. Several throw out bearing carriers on or 2 of them new. One with a throw out bearing. 2 new ignition caps. Points and condenser sets. New brake parts, the cast links that go on the brake bands and new push rods with the turn buckle set. Some new lug nuts. PTO bearings a whole bunch of seals I think they are for the transmission and final drives. And outer stuff I can't recall at the moment.
Sorting through it took quite some time. I was trying to label and mark the stuff with the original part numbers to make it easier to find what I need. That's what took the time. That's why I am trying to find out if any one has ever seen the ones in the pictures. Thanks for your help.
Cliff.