We got about an inch of rain followed by 8-10" of heavy wet snow followed by another 5-6" of powder over the past couple days. After shearing the plow lift arm pivot pin on the LoBoy and snapping the winch lift cable on the quad, the 1948 Cub with the blade belly-mounted came to the rescue. It was able to scrape to the bottom and peel away the waterlogged stuff without pushing the tractor sideways like what was happening with the LoBoy. In fact, it did so effortlessly. I will keep this in mind for the future.
I picked up a piece of 5/8" steel round stock to replace the pin and will trim and loop the winch cable again on the quad. I knew there had to be a reason to keep three separate pieces of snow removal equipment around!
I picked up a piece of 5/8" steel round stock to replace the pin and will trim and loop the winch cable again on the quad. I knew there had to be a reason to keep three separate pieces of snow removal equipment around!
