harbor freight

smigelski

501 Club
A word to the wise. I am a harbor freight freak. I use their hand tools mainly because I loose them before I break them. Snap on replaces broken tools, not ones that got lost in a field. I am in need of a small horizontal shaft motor for a rotortiller that is as old as me. So not wanting to stick a $400 motor on something that could give out at anytime, not to mention it gets used about a dozen times a year. I saw 6.5hp engine for $159, my local harbor freight always has displays, but hardly ever has engines in stock. So I ordered it on sunday. Yesterday, my father wanted to run to harbor freight for some sockets, since I welded a bunch to make other tools. When I walked to the section in the back, here was the 6.5hp on sale for $129, with several in stock. So I called to cancel my internet order right away, since it was $179 with shipping. I will place bets the call center is not in the United States. I had to talk to 3 people before 1 spoke english well enough to understand what I wanted to do. The first 2 people did not understand the word "cancel". They had no clue or ever heared the word. So the 3rd person was very upset that I was going to cancel the order and wanted to know why. I explained the price difference, he promptly disagreed. I then gave him the flyer number that listed the engine and price. He then still wanted to keep the transaction and give me a store credit of $25. I explained that was still $25 more then I could walk out of the store with the engine price. I was then transferred to a manager, that person spoke somewhat better english. This person was able to cancel the order and apologized for the delay and stated the others that I had spoken to were not trained on how to cancel an order. For my inconvience the manager gave a $25 discount coupon for my next internet order. So before you order something online go check and see if is cheaper at the store. They run 2 different sale catalogs, 1 for the stores and another for the internet orders.
 
I have run into that before, and at times have seen 3 different prices on same item. Like you, I use a lot of their cheap tools, and if I need to weld one up to make a special item they are so cheap it doesn't bother me. One of my favorites is socket I welded inside a hot water element wrench so I could use an impact wrench or breaker bar on it. Sadly my closest Harbor Freight is about 70 miles from me. come to think of it, that may be a good thing.
 
Also, if you happen to catch a sale online and take it into the store, they will honor it even if the store sale has ended. Good stuff for what i need it to do.
 
When my father just started out his residential electrical business he use to buy only Craftsman tools but then he hired some helpers. He would often send the "young guy" up in the attic or crawl space and they would loose or drop tools into the insulation and never find them.

Now he buys HF tools and when they loose something it is no big deal. Plus, people don't tend to walk off the job site with HF tools in their pockets.
 
I have found that the stores often have great prices on big tag items. When I bought my 20 ton press it was an in-store special that I could just not walk away from.
 
Cecil":3hxv4ezw said:
BD I'm beginning to think all of us have one of those presses. :lol:
You think?
press.jpg
 
Harbor freight has a lot in common with TSC and WalMart in that darn near everything they sell is made in China :(
 
I saw an advertisement for my nearest harbor freight carrying a 7.5 hp electric motor on sale, IN STOCK it said. Drove tan hour and a half over there to get it, and they did not have it, had never head it, never heard of it, closest that they had was a 1/4 hp (only one they ever had).

Guess I should have called first. That is what I get for taking them at their word.
 
Funny but my mechanic friend snickers at my Craftsman tools. But some of the HF stuff is just too cheap to pass up, even if you only use it once or twice.

Be careful though, I had chunks of razor blade go flying when I was scraping the gasket off the upper neck hole on the head. Scared me a bit... another good reason to always wear safety glasses! :shock:
 
Larry:
Buzzard Wing":3i3qpalw said:
Funny but my mechanic friend snickers at my Craftsman tools. But some of the HF stuff is just too cheap to pass up, even if you only use it once or twice.

Be careful though, I had chunks of razor blade go flying when I was scraping the gasket off the upper neck hole on the head. Scared me a bit... another good reason to always wear safety glasses! :shock:

You need to come back for a visit so we can go back to Princess :!: :wink: :D :arrow: :lol:
 
I would love to Rudi! They seem to have higher quality stuff and I like the 'closeout' section. It was killing me coming back from MIchigan after Christmas to see a Princess right off the highway in Sarnia.... It's a long drive and no time to shop. But I know it's there now.
 
Larry:

Princess is the only reason I can afford to get some of my projects either started or completed. Like the wood splitter.. the ram is normally $300.00 thereabouts, I got it cause they missed it during inventory, so they charged me $50.00Cdn.. :big say what: ... yeah.. course it pays to know and chat with the managers as well... I like Princess, it is MY department store..

Course with all things, you have to watch what you buy as the difference in quality can be quite broad. Although I will say this, I have yet to break anything from Princess, and although I treat my tools with respect, no tool gets a free ride, they work for the right to lay in a tool box when not needed. I have only ever had to bring back anything to Princess once.. and that was because of a recall... :!: Well, pumpms excepted of course... :lol:

BTW, you are welcome any time, but you already know that :!:
 
Back
Top