Harbor Freight tools

Some of the cheap stuff can be used okay. When I was in the work force and worked in a paper mill, I bought only Snapon or Mac tools because of the safety factor. Another guy on the same shift bought adjustable wrenches from one of the cheap outfits and it slipped while he was trying to tighten a guard. I had to open the machine to remove his hand. That kinda turned me against the soft metal tools they sell.
 
smigelski":375w25p1 said:
I buy alot of wrenches and sockects from harbor freight, I use them alot. Sometimes they are not really the right size, like a 1/2inch really isn't a 1/2inch. However I only spent $13 for the whole set. I probably buy 1 new set every year, if I come across a set that the sizes don't match up, I get another set. I would buy the top end tools, but they are to expensive. I loose more wrenches then I brake. Also snap-on doesn't warranty a wrench if you put a pipe on it for more leverage and it brakes or bends. I bought a fluxcore wire welder from them and it is great, I am getting ready to get a shop press in a few weeks.
I have there 20 ton shop press. It is still in its box for the most part in the corner of the barn. I did not have time to assemble it yet. I plan to use it to make apple cider. I also have there right angle drill the high torque one. I have used it to build one retaining wall soo far and it is holding up well. It also comes with a replacement motor brush. I had to go in and lock tight some of the screws that hold in the arbor no biggy. I bought the two year warranty on it because I have one more wall to build and two more to build on my neighbor's land.
Some one once said that modifying harbor freight tools to work and work safe was a hobby all on its own :lol: .
 
Yellow Lo-boy":2s8p1ym7 said:
I like to buy tools that are made in good old USA.


i want to get this straight,buy tools made in the usa or buy tools in the usa,do we make anything any more? :roll: :roll: :roll:
 
DanR":3iitdh9k said:
I needed a seal for a HF spray gun. In stock $1.18, shipping $7.50, new gun $9.99.
What does it spray (paint?)? What kind of a seal is it? That is the sort of situation that gets me looking for a substitute part. I know, for $9.99 it isn't worth spending time on but repairing junk is what we do.
 
Rudi":3486367l said:
Jim Becker":3486367l said:
I know, for $9.99 it isn't worth spending time on but repairing junk is what we do.

:big smile: Got that right :!: :D

Jim & Rudi,

Yes, we repair junk, sometimes to a pristine condition, sometimes to work clothes. However, I do not want to use 'junk' to repair junk. :) :) I don't want knuckle-busters for hand tools.

Bill
 
I think I have to word this right, cause there is no right or wrong here, just opinions I guess. As my son-in-law to be just said, "the only time tools turn into junk is when the operator uses them inappropriately." There is different price groups, but essentially they all do the same thing. USe the tool as it was intented. Do not use a screwdriver when a pry bar is needed.

Bill, I agree, I do not want to use junk tools either. But who said Harbor Freight or Princess Auto products are just junk :?: Yes they most definitely have some junk tools/products on sale and that stuff I stay away from like the plague. However, they have some middle quality and some higher quality tools as well that are more than acceptable. Are they all professional grade? No, they are not. But their middle and high end are good tools for the home handyman, the tractor restoration hobbyist or the backyard mechanic who does not have the financial resources to purchase MAC Tools, Snap-On or Craftsman as those command professional prices which are beyond the average guy's budget.

I do not confuse professional grade tools with Harbor Freight, but then again, I am do not compare my Cub Restoration projects with a full time salaried job where my tools are my living. I am just a veteran on a limited pension who needs decent tools that I can afford. I can stand here quite nicely and say that there are many tools are very good quality. I have professional grade tools from Europe, Japan, Brazil, the US and Canada. I have mostly high quality stuff. Some tools I have paid literally thousands for such as my Ulmia Schrienermeister Handtwerkzeugschranke for my furniture making busness. Not many people even in the trades require the quality of a plane with a solid rosewood base, red beech upper and a lignum-vitae sole. For most a good steel shod Stanley would be enough. I am positive that there are many people who would or could afford to pay over $5,000.00Cdn back then to buy that kind of quality. I have some Snap On, Craftsman as well as some very old tools.

This is quality tools. It is not my cabinet as they do not seem to market it anymore. It is very high end, and probably my pride and joy in tool cabinets. Some have seen it.. most haven't, so I guess I need to take a couple of pics..

56_316.jpg



I also have many tools from Princess Auto. Not one of them are knucklebreakers but good solid quality tools. Princess markets a brand of tools made by Gedore in Brazil, Gedore is originally from Germany and has their branch in Brazil.. Their tools are both SAE and metric. I have taken off many, very many rusty bolts, frozen solid from years of exterior exposure, and with a liberal dose of a good penetrating oil and patience, these tools have been able to do the job without breaking knuckles or breaking themselves. OIn fact,m the only werench I have ever broken was a Grey Tool and these were high end military quality tools.

I certainly could not afford buying a 1/2" clicker Torque Wrench from SnapOn or Craftsman, but I could from Princess. Wil it last a lifetime? No, it wouldn't, especially if used everyday. But for what I need, it is more than enough. Plus it does come with a lifetime replacement warrantee that SnapOn just does not have.

What really would be a good thing is someone to do a review of the tools that they use. We have the review forum, and this is one way to actually compare quality, price, and reliability.
 
Rudi,

I didn't mean to get you exercised. What I said was tongue-in-cheek. Yes, I too, shop at Harbor Freight and have been known to buy boxes of tools at farm auctions.

Bill
 
Back
Top