Grease zerk location

[chuck ma]

What other grease zerks are than the 5 on front axle 2 on touch control arm and the 1 on the throw out bearing tried looking in the operating manual I could not clearly find any more. My manual is one those reprints so a lot of the pictures are not clear.
Thanks Chuck

 

[Dale Finch]

PTO, front axle pivot pin, and sometimes near the base of the clutch pedal on the right side of the clutch housing or near left brake rod forward attach point. Oh, and on some, a zerk on the steering shaft support bracket, instead of an oiling hole.

There's a lubrication schematic on page 64, with the complete Guide on the following pages.

https://farmallcub.com/rudi_cub/www...actor Operators Manual Rac 1014462R2 2001.htm

 

[tst]

PTO above the shaft
depending upon year clutch pivot shaft near bottom of pedal

 

[tmays]

Location for a temporary zerk on the distributor

 

[NJ Farmer]

The distributor has TWO plugs that are removed and a zerk fitting “temporarily” inserted to lubricate the distributor shaft and drive gear. The service manual describes how to lubricate and don’t go crazy just one or two pumps. See manual for details….

NJ Farmer