Golf cart help needed

I have a 16 year old 2 cycle golf cart that the muffler is plugged on. New mufflers cost more than the cart is worth. due to the angle of inlet and outlet, punching or drilling through the baffles is not an option. Does anyone have any suggestions how to clean it out?
Thanks
 
John,

Is it plugged with carbon or something else. Also, can it be removed?
8)
 
Old trick for carboned up m.c. mufflers Take it off, stick a lit cutting torch in the inlet just menough to ignite the oil and crud. Shake out the ash afterwards. Use caution their may be a slight explosion.
 
junkman1946":3ry4jnbj said:
Old trick for carboned up m.c. mufflers Take it off, stick a lit cutting torch in the inlet just menough to ignite the oil and crud. Shake out the ash afterwards. Use caution their may be a slight explosion.

That's exactly how we would clean out expansion chambers for our dirt bikes.
8)
 
checked the inlet and outlet, and both are dry, not oily like the old dirt bikes (83 to 1 mix), so I called a dealer that has sold them for years. As soon as I told him what I had and the problem he started laughing and said I can tell you how to fix it, you sure don't want to buy a new one. His instructions were to go a little to the left of the outlet (in front of the baffle) and drill 1 or 2 holes 1/2 inch in diameter. he said it would make it a little noisier but would solve the problem. He was right.
 
How cool is that John *.?-!.* !
I wish all fixes came that easy. Glad you found the solution.
 
golf cart engines are not high performance, high revving engines like a bike, max rpm on mine is 3200, plus it has a pipe about 18 inches long ahead of the muffler. the performance is definitely improved over a plugged muffler.
 
nope, old ParCar (formerly Harley Davidson). not very fancy, but has done good so far. I bought it used, and run around 30+ gallons of gas through it every year. When I told the service man I was worried the engien migh be worn out he told me that as long as it didn't get run without the oil mixed in he didn't think you could wear one out.
 
Could be, but it would require more than just reworking the engine, differential, etc. is not balanced like a car differential is, when it gets to about 15mph, the rear end vibrates, etc.
 
Back
Top