We have one, overall very favorable impressions, and I agree, install is everything. Very efficient, UNLESS you have an issue and it uses its auxillary heat, in which case you will use a ton of electricity. Things we learned, don't fluctuate your temps with the heat pump. With gas or oil it makes sense to program it to drop temps during the day and reheat when you're on your way home, same with lowering it overnight and having it warm up in the mornings and such.
With geo thermal your heater is more a heat maintainer. You don't want to increase the temps more than a degree or two degrees at a time. So if its at 65, and you want to get to 70, set it to 66 or 67 and wait, or else they will use the auxillary electricity to help heat the house faster. Once its at the temp you want it will hold that temp easily, but raising temps rapidly is not easy for the system.
With ours we've occasionally had electrical things to repair. Namely, connectors, relays, and capacitors. These are not hard to troubleshoot and install, so we keep these parts on hand, the connectors are supposed to be replaced from time to time. Basically all the parts cost about 1/3 of what your furnace guy will charge you, and then they charge you 80 bucks an hour, which you can do it free if you have any skills.
One thing I need to retrofit is valves to close off the flow of water to the pump and drains, so that they can flush the unit from time to time.
Another way to make your unit more efficient for you is that some units will help maintain the temps of your hot water. In which case if you have either heat or AC on your electric bills for the hotwater heater will be lowered with not much difference in the pumps running at all. Mine isn't plumbed for this since we seldom use air conditioning.