staninlowerAL
501 Club
Well Guys, I thought I had this problem resolved https://farmallcub.com/community/th...on-vs-autolite-spark-plugs-comparison.118786/ but I'm continue to have intermittent issues with the Circuit Board control module. A little background: OEM part failed and was replaced with another OEM part that lasted about 1.5 years with intermittent use. When that one failed (with some of the same issues) I purchased and installed the 3rd module which lasted about 2 hours. This time the engine would not start because there was no spark/power at the plugs. I've since replaced it with the 4th module and it started immediately, now running as expected so it's yet to be determined how long this will last. (I did purchase a 3rd party warranty agreement with the last one.) So, my question is--is there anything that I might check to see why it's going through the control boards? They are resin sealed and I have no means or knowledge to be able to troubleshoot/test them, just swap parts. Stan