Found On Road

  • Thread starter Thread starter Anonymous
  • Start date Start date
A

Anonymous

Guest
Dead, dead dead :!:
img_0239.jpg


Never seems to end, now it seems the injector pump is shot :!: Ford says $2,400 to fix it. I should just shoot it and ride the Wing :wink:
 
I have alot of buddies in the states and up north.None of them are happy with these new engines.The 6.0L and the 6.4L.These guys really depend on a truck and they are not coming thru.I hope for Fords sake they get this worked out.I know a lot of :censored: people on this subject.Kevin ps not a pretty sight!!!
 
2,400 dolars :shock: I'd go somewhere else like a true truck repair shop and get another estimate from someone that really knows about truck engines.

I drive nothing but FORD trucks ( 9 trucks and 3 diesels) at present I have 2 Powerstrokes I just love these engines there tough for sure, recently my dual mass fly wheel went south Ford dealer wanted 1,900 dollars just for the fly wheel the total cost for the clutch job would have been 3,000 plus some at the dealership aka stealership :shock: :twisted: ,,,,,, I went to a heavy truck repair shop and they did the whole and all parts for 1475 dollars
 
Yikes!

Ketcham told me to steer clear of the newer diesels.... so I got me a 7.3L (2001) with 212,000 miles (some are KM, cause it's Canadian) and it seems like a good one.

BTW, $2400 is what I got for my 95. I owned it for 95,000 miles and it did get towed once, on the way back from a Cubfest at Cecil's. Broken belt tensioner (bad bearing), the shop had one in stock, $130 for the repair. I did have my 'lucky Larry' hat with me that day.... the shop was 4.7 miles and AAA allows 5, but they did charge $20 extra because I had the slide in camper. The driver took a tape to the top of the camper, loaded it on the flat bed and I puckered a little when we went to go through the tollbooth cause I was thinking he didn't count the stuff on the top of the camper, vents, ladder, TV antenna..... It's all still there.

Best of luck to you Donny... it's too late to loan you my lucky Larry hat (it's pretty dirty anyway and I may need it).
 
Donny,

:roll: :roll: Doesn't have one of those rubber tipped float needle valves does it? I live where you seem to always be going up hill. See a lot of the newer Ford's dead along side the road. Don't feel too bad. A friend of mine has a 2008 that started running poorly. Overheating and no power. Turns out the cam shaft wasn't hardened properly, the lobes wore down and the valves naturally weren't opening all the way. He's fighting with Ford right now since the truck is just out of warranty. Used to be an old GM problem but I've never heard of that issue with Fords.
 
I guess I can't really complain too much, I've run this truck for 220,000 trouble free miles. It's only now It's starting to have troubles. Let's see, since March I've had a FICM (fuel injector control module) installed $1,400, and new front main seal $600, new turbo cooling EGR and associated parts, $3,000 and now the injector pump $2,400 for a total of $7,400 much cheaper than the 54k they're asking for a total replacement.

Larry I was fairly lucky myself, I had just left the RV park heading toward Shreveport and was exiting I30 to get on 245 in Texarkana, AR. Only 3 miles from the RV park. When I got on the ramp I started to slow down and then felt the brakes go away. I noticed the tach at 0 so I got off to the side as soon as possible. Once pulled over I tried starting to no avail. Good thing for cell phones a wrecker was there in less than an hour. The towing was completely free up to 100 miles, but I'd hate to tow that rig more than 5. Had this trouble waited another 5 minutes to show up I would have been trapped on 245 (under construction) a single lane with Jersey barriers on either side and no place to exit. Although this sucks big time it could have been worse :!:
 
Donny M":1m4p0o8v said:
Although this sucks big time it could have been worse :!:
And for that I am so very thankful. Have a safe trip home Donny.
 
Never a good time to break down, but some are more fortunate than others.

My other tow story: downtown Boston (southeast expressway just before the leaky tunnel) Friday rush hour on Columbus day weekend (and a Red Sox game) and the KIA (I know what that means!) decided that the clutch was tired of the stop and go traffic and quit. Interesting, the Mass Pike (and only them) can tow there and they will only drop you at the south Boston state police barracks. But it's a free tow and the guy that towed me was a great guy. Got a tour of where the old highway went and I was considering my options (including setting fire to that POS). I thought I would try it again, the pin that actuates the hyd piston for the clutch had fallen out and the piston was seized (rusty). Seems the spray lube I keep in the car worked and other than the pin would fall out when the pedal came back, but I had a clutch again. So I stuffed a partially inflated plastic soda bottle in to keep the pedal from coming back too far and off I went. That was the only vehicle I ever sold where I was nervous about selling it to anyone I knew, or even anyone nearby. When I was shopping for a truck I got the month of Carfax (worth the $40) and a year later that thing had not been titled. Possibly KIA was buying them up and crushing them? Or shipping them to some unsuspecting 3rd world country??

Two morals to that story.... always keep a can of spray lube in the vehicle (preferably Kroil) and no matter what the situation is, it could be worse, so make the best of it. (whining will not make it better) Heck I was kinda disappointed that I didn't have dinner at the No Name.
 
I been leaning towards buying the older trucks that i can still work on, well my kids fix it and i teach them. So far my '79 $900 C20 chevy rack body truck isn't purdy but it has a goodwrench engine and runs all the time. I'm thinking of getting an older 1 ton 4x4 or bigger next. The old army trucks for 5k aren't bad either. A duce and a half would make a great mudder with 3 lockers in the diff's.
 
Back
Top