Bus Driver
501 Club
Within two days, both of my cheapo floor jacks quit working. Same problem with each, bad "piston" in the pump. These two jacks are identical, 30 or more years old. "Beijing" stamped in the housing. The label is Hollywood Accessories, Compton, California. No such organization to be found by internet search. Jacks are model 649N. These have actually used very little, only occasionally and look like new. Never abused or overloaded.
Harbor Freight sells similar as item 68783 for $29.99. Their pump looks to be different bore and they offer no parts for the pump.
The original "piston" was probably a plastic with a copper ring to hold pressure against the bore. The plastic crumbled. The steel rod part of the pump piston is like new and has a ball end that fit into the plastic with the copper having a retaining ring to hold the two together. The copper enclosed the plastic.
Probably I will just have to buy two more jacks. But has anyone here ever devised a homemade repair for such jacks?
Harbor Freight sells similar as item 68783 for $29.99. Their pump looks to be different bore and they offer no parts for the pump.
The original "piston" was probably a plastic with a copper ring to hold pressure against the bore. The plastic crumbled. The steel rod part of the pump piston is like new and has a ball end that fit into the plastic with the copper having a retaining ring to hold the two together. The copper enclosed the plastic.
Probably I will just have to buy two more jacks. But has anyone here ever devised a homemade repair for such jacks?