Fire wood

Heller1m

Well-known member
I'm wondering how much wood you guys stockpile for a winter. I know that you guys that live farther North will need a lot more than someone around here (midstate Illinois).

I've heated with wood off and on for a long time but this will be the first year that I intend to use wood as my primary heat source. I want to have enough on hand to last the winter. I have about 14 cords and all but about 3 are in the basement. I only have room for about two more cords downstairs, then I'll have to start stacking outside. I'm wanting to put up a lean-to, so what's left outside is out of the weather.

I'm also curious, how much is firewood selling for around the country?
 
Central Missouri - about 1000 sq ft one story house with full basement. Son heats with wood and uses a high efficiency propane furnace as backup. Last year he used about 5 or 6 cords of mixed species and quality wood. Previous year about 4 cords of mostly quality oak.

We have around 5 or 6 cords cut and stacked outside and in the weather for this winter. None stored inside. We will move about 1 cord at a time under cover about a month before moving it inside. Inside basement storage - about 1 cord.

Local prices - none advertised at the current time. I suspect around $65- a full cord.
 
Cover it cover it cover it. I say cover it. Dry wood is your friend wet wood is your enemy. I cover with others old pool liners. I use a 2x4 with screws holding a 1x3 to hold the sides down. No matter what the winds are it seems to work. Lately I have used a 2 layer with pool liner on the outside and pool cover or tarp on the inside. The 2x4 and 1x3 are heavy enough to hold the sides down and the wood is dry as you will want. A friend went through the fastening and all kinds of stuff but I find the weight enough. I get the house up to 85 degrees F with a minus 20 degrees outside if I don't watch my step and the have to open doors and windows I try not to have this happen often but it is nice to walk around naked with a minus 10 or 20 degree temp out side. With a 1200 foot driveway I don't care who is looking even if using a spy glass. Lurker Carl know the length of my driveway.
 
In central NH,the past 2 winters I've burned about 6 (128 cubic ft.)cords each winter.Approx. 1600 sq. ft. house,combination wood/oil hot air Yukon Eagle furnace.
In this area,green 16" firewood sells anywhere from $170-220 per full cord cut,split and delivered,dry wood as high as $300.
Mike
 
This is one of my more favourite off-topic topics. I have been heating with wood as a primary source of heat for the last 22 years I guess. Prior to that we have heated with electricity, natural gas, oil and propane ranging from my home town of Timmins in Northern Ontario, to Ottawa, to Inuvik NWT, Alert NWT and Lahr Germany. Growing up my grandparents heated only with wood. I have found that there are primarily two types of heat. Warm moist heat and warm dry heat. Natural gas, propane and oil are fossil fuels that provide warm moist heat, primarily because they are used in forced air systems. Electric although it also may power forced air systems, predominantly is used in radiant heat which is a dry heat. No convection no moisture moving around to negate the dryness or reduce the amount of energy needed to provide the heat necessary. Radiant heat is by far less efficient than moving or forced air heat.

Wood is probably one of the best, most environmentally sustainable, comfortable and affordable forms of heat that we have today. It is the epitome of warm moist heat be it either in a forced air system, or radiant as in passive wood stove systems. It is also one of the oldest known means to heat a home.

Ok, so much for history. Here is the numbers for us here.

I have a 1200 sq ft 3 level home which equates to 36,000 cubic feet of building to heat. We have a Kerr Scotty DB2 Forced Air Wood Furnace with a capacity of approximately 70,000 btu's. Our backup is a 30KW Electric Furnace .. but we have only used it once when we set it up and haven't used it since. Average winter temps run in the -20 to -30 Celsius range. Winds average around 30 to 60 km/hr with gusts in blizzards to over 100 km/hr. To say the least, winters can be cold, they are also not short. Heating season can start as early as September and definitely full tilt by mid October and can last until May. Heating season lasts at an average of 7 months of the year. Insulation counts for a lot in climates like ours. Our house is not exactly R-2000 as when I built it, R-2000 homes were not common. However, it is built with 2x6 walls fully insulated along with exterior weather wrap under the siding, taped joints, sealed windows etc., with make up vents to balance the pressure and provide sufficient fresh air needed in a forced air system. Houses with less insulation will require substantially more energy to heat.

We use approximately 4 to 6 cords of wood per year to heat our home. I have yet to burn more than 6 cords except the first year when the house was still wet from construction. We burn a combination of soft, soft hardwood and hardwoods. One should never burn just hard or just soft. A good mix provides the best most even heat and also provides for sufficient temperatures to ensure the minimum of creosote build-up in the chimney. I usually build a hot fire in the morning to eliminate any creosote buildup from the overnight fire which is usually a couple large hardwood logs. They burn slower and provide consistent heat for hours. A hot fire will bring the heat up quickly, clean the chimney and start a good bed of coals so that the daytime fires can be built with a mix of woods to provide a medium hot fire that will last all day.

Normally we harvest 10 to 12 cords per year. This usually gives us a 2 year stockpile. Keeping wood for 2 years, as long as it remains dry will provide good heat value per/cord. Any longer and the wood begins to lose its heat value. Keeping wood dry, does not necessarily mean keeping it covered or indoors. Wood has bark and bark is woods natural protection. l By properly stacking wood so that the top layer of the stack is bark side out, then the ability of water to permeate the pile is reduced substantially. By having good air flow, the wood will also stay dry.

Oh.. good firewood here runs between $150.00/cord (short as in 8 foot) or up to $225.00 for split (long cord). Still way cheaper than a tank of oil.
 
Well you guys up north have a lot colder weather then we do. I have 1700 sf and use wood only and only use about 1 to 11/2 cord
if it is a cold winter. I cut my own wood but I think they advertise 120 - 150 delivered.
 
Up here in Maine we start the wood stove up in late September and shut it down usually in mid April. I usually use about 4 cord each season that is stacked in single rows outside to give maximum airflow on each side of the piles. $175 to $300 per cord is the range here.
 
here in southeast pa. i had three cords starting last winter and finished the season with about 3/4 cord left over. i stack out under the evergreen and move it onto the screened porch before the september rains, or after if it catches me. i agree with bill it's got to be covered ,or plan on staying warm trying to start a fire. being well seasoned would be the second big deal besides having a good mix of hard and soft wood. i've payed from $100.00 to $175.00 a cord. i'd only pay the high dollar for iron wood ,oak ,locust or good fruit wood. not so much for the lighter stuff. i've contracted for two cords this year at $120.00 per supposed to be oak and maple. :roll: :arrow: :idea: i use propane as a back up and only burn constantly when it goes below 32degree day and night or it's plain foul weather.
 
Here at my place i runn a fireplace and keep the thermostat at 65. So the fire is going often. we go through 4 trailers of firewood a year. Trailer dimension 14x 6 x4 high. I load 3 up and have by the house by late october, the other split and sttacked on a platform waiting for me to get in Feb. I dont stock in house or near house, bugs.
 
I guess everyone looks at heating form different viewpoints. I live in east central Mo. My house is small, only about 1250 square feet plus an unfinished basement, however, it is very well insulated. My main heating/cooling, is provided by a geothermal system, which operates cheaply enough that even if I were able to cut wood, it still would be cheaper. I do have a wood circulator in the basement that is used for backup, for when power is out, or if it is suspected it may be out due to ice storms, or extremely cold weather. with that system I normally use only a rank or two per year. The one winter I did use it seriously due to the system failing to the point of not being economical to repair (20+ years old), I heated nearly the entire winter on 2 1/2 cords of wood, while deciding what to replace it with.
 
This is such an interesting thread... :D :-:-): :D

Geothermal systems can be quite efficient and economical depending upon your climate. In moderate climes geothermal can be the most cost effective form of heating and cooling as long as there is no huge difference in temperature range.. or at least that is the theory as I understand it.

Em's aunt used a heat pump to heat their home. The heat pump is an electrically powered unit, ,and electric heat is used to bolster the heat recovered from the ground. Her electriciy bills go from a summer average of about $250.00/month to about $400.00 to $450.00 as an average in the winter. Still not too bad I guess compared to oil, natural gas or propane.

This is the part I like about having my own woodlot. It costs us about $100.00 to $175.00/year to heat our house. That cost includes the cost of the fuel to cut, haul and split the wood we need and the cost of the elecricity to power the blowers.

When deciding on what type of system to use really will depend on the cost of the various forms of fuel in your area. Also, what is the pay back time for these systems or for other newer technology systems such as solar or geo-thermal. We are seriously looking at integrating solar heating to provide our hot water. The payback will be in the order of 30 - 36 months and will probably reduce our hydro bill by over 40 to 50% :shock: :!: :arrow: :{_}:
 
Wind storm took down some large limbs from a black walnut tree. Spent an hour of so cleaning up the mess. Cut up most of the usable wood into stove lengths and stacked it. I'm getting firewood cleaning up son's acreage. When the neighbor brings the highloader over for some work I'm going to have him cut a path along one side of the hill. The idea is gain easier access to a large number of dead and downed trees to clean up and turn into fire wood.

In this immediate area you can go to the saw mills and get cutoffs. A couple years ago it was $35- for a large pickup load - you load.

When the local construction companies are clearing land - you can get a large dump truck load of trunks cut into stove lengths for $150-, delivered. The lumber is not split.

Edit: Neighbor repairs pallets and has to haul off damaged pallets and pallet tops as part of his contract. I get a pickup load of pallet tops and cut off the corners (remove nails). The remaining pieces make excellent kindling.
 
I agree with Rudi, geothermal depends on location, but also on how it is installed. My first system was not installed properly,but still was efficient. current one was installed by a different company, and is more efficient. For a family of 4, with computer and tv probably being run 10 or 12 hours per day, cooking for us and my mother next door, lights and equipment in shed plus a small room that is heated and air conditioned with standard methods, our electric bill averages around $125 per month including taxes and surcharges. Was about $110, but we had a rate increase last year.
 
Hi Everyone!

We burn 3 to 4 cords of wood and keep the majority of it outside. We have a couple of racks in the house next to the woodstove to store some wood, and also stack some on our front porch and in front of our garage doors.

The house is a 28 by 42 center chimney cape with max insulation; R-25 in the walls and R-38 in the ceiling. We do not use the heat at all and the stove is going 24/7 and we burn in between the 3 and 4 cords I mentioned. We start burning in the fall and burn straight through to the spring. Sometimes we cut down our own wood; sometimes we buy the 4 cords. If we buy 4 cords, we usually have some left over.

In my area of New Hampshire, unseasoned wood cost between $165.00 and $200.00 a cord and seasoned wood runs between $225.00 and $250.00 a cord in my area. Most people in the area that sell wood have a 2-cord minimum purchase. Most will not deliver a single cord. There are some smaller operations that sell by the pickup truck load. I guess one could go that route if they didn't need the 2-cord minimum. We only burn well-seasoned hard wood.

Stacey K. in N.H.
 
Last year was our first year of heating with wood. We would of liked to heat all winter long but we had to save some for power outages. This year we are building a wood shed with using pallets to store a few cords. We are also buying another stove for the upstairs living room, a soap stone stove and with the new tax credits you cannot go wrong.
Here is a link to the Pallet shed we will be doing after our root cellar goes in this coming month (the footing will be poured in the next 2 weeks! :big afro: )

http://summerville-novascotia.com/PalletWoodShed/

This is a great message board all about wood burning
They cover everything and helped me choose my splitting axe!!

http://www.hearth.com/econtent/index.php/forums/
 
grunt:

good link, I enjoyed it. Have been recycling like that for years. Pole barn is almost entirely built from recycled/recovered materials. Nails, screws, ashpalt etc., were the only new things purchased. Even the 2x6's were 2nds and 3rds that I got at Happy Harry's for pennies on the dollar.

My father-in-law and I salvaged a number of galvanized fencing sections mostly rails and posts (posts still have concrete bases). Ray and I are going to use the auger truck to utilize the galvanized fence posts as the primary structure for my wood sheds. That way I can use 4x8 foot panels to keep my wood dry. Plywood panels for winter and screened panels for spring, summer and fall.

Lots of good ideas emanate for reducing, reusing and recycling :idea: :!:
 
Back
Top