Fire Radio battery question

Pony Master

501 Club
I have been on the fire department for almost a year now. I really enjoy it, and a few months ago decided to purcase a used radio. The battery was mostly shot, but the guy who reprogrammed my frequancies was able to revive it. He told me it might not last long, so I started shopping around for a battery. I finally settled on one from E-Pay. I purchased it, but when I put it in my charger it shows a battery fault. After several conversations with the seller, we figured out that my old battery was NI-CD while the new one is NI-MH. The performace of the new battery would be much better, but my charger does not want to charge it. Anybody got any ideas what I could do to get my charger to accept this battery?


If it matters, the radio is a Motorola Sabre with the proper Motorola smart charger.
 
Rather than risking damaging the battery or radio by modifying the charger, look into a replacement charger, they are not that high. Are you sure that is the problem? I did see some notes about the Motorola smart charger being finicky about batteries, and if they were very low not wanting to charge. Included was a note about applying a voltage to the battery for a while before charging it if the charger would not accept it.
http://forums.radioreference.com/genera ... ights.html

http://www.cutratebatteries.com/battery ... SK-CHARGER
 
Chad What brand of portable do you have ?
I manage the portable radio inventory For my FD We have all Motorola MTS an XTS portables and only put intrinsically safe NI MH batteries on the ruggedised cased portables. The MOTO batteries are their IMPRESS technology so I can test and recondition the batteries in the special test charger i have on my test bench. If you have a MOTO Radio I may be able to fix you up with some batteries that we recently acquired from the PD

If you have a Batteries Plus or an Interstate Batteries close they will have a battery to fill your need
 
Back
Top