Ferguson TO-30 hydraulics

Being in Michigan, would you do the 80w gl-1 or the 90w? I plan on keeping it in it year round. Or, since I have to buy 2 gallons at a time, mix them?
 
25* out and tried out the Ferguson. It takes about 1 minutes to go from full down to full up. Still had 15w/40 engine oil in it. It sat still and ran so there was no heat in the fluid at all.
 
Just an update. I put a magnetic engine block heater on the trans/three point fluid and it ran quite decent. No record breaking speed but with 18*f temps full down to full up in less than 15 second. I’ll take that as a win.
 
Back
Top