Engineering oversites or should i say mistakes?

BigBill wrote:
I had 127,000 miles on my chevy suburban V20 4x4 that had the 10,000lb trailer towing capacity and i never replaced the rear brake shoes the whole time not even once. While i replaced the front disc brakes many times.
Depending on what year the Suburban is, G.M. addressed that issue with a Technical Service Bulletin.

SteveB wrote:
Now that I have the HD 2500 with the 4 wheel disk brakes I will not have to worry about the soft brake pedal
We have seen rear disc brakes with premature wear for some reason on those trucks. Keep an eye on them.
 
I have a '94 Z71 with 95K miles. I've replaced the rear shoes once, although they didn't really need replacing at the time. The front disc pads, twice. Just last week I had to replace one of the front brake rotors, due to warping. I think I know when it happened. I was hauling bricks and concrete blocks in a trailer that didn't have the brakes connected. It's the only time I can remember of having lost my brakes due to heat build-up. I took a "short-cut" home that day and went down a long, steep grade. I barely had brakes at the bottom of the hill. :oops:

IMHO, for increased brake life, avoid those sudden stops if you can, and be certain your trailer brakes are working properly.

By the way, the rotor cost only $35 bucks with no core charge! Chinese, of course!

Larry
 
Back
Top