Electrolysis Rust Removal

thiggy

Well-known member
I have on several occasions effectively used the electrolysis method to remove rust from iron objects, but now have something that I am not sure of. I have an old 25 cal Colt automatic which prior to being left for a few days in a house after a fire, was in pristine condition. It did not suffer fire damage, but the moisture has caused some rusting on the top of the slide, particularly in the groove where you sight down the barrel. My question is will the electrolysis process remove only the rust, or will it also remove the bluing? (By the way, the gun was a gift to my grandmother at the time of her wedding in 1910. Her father felt that everyone in rural Tennesee should have a gun in the house.) It is in the original cardboard box with the original instructions.
 
Stanley, I think you might be best to take it to a gunsmith for his/her opinion. Sticking it in an E-tank may cause some harm. You have a great heirloom there, so there is no reason to risk further damage.
 
If only fresh, light surface rust, try using the lead end of a lead pencil to "erase" the rust.

If that doesn't work, the gun smith.
 
Stanley , If it were mine , I would not risk the e tank on any firearm of any value. The effects of the fire are now part of the pistols history . You could try a product called Flitz , found at many gun shops. It may work for you , depending on how severe the rust is. it is a mild polishing compound that shouldn't remove the bluing. It is marketed for firearms and is my favorite. You MUST read the instructions first for the warning not to be to aggressive with it. Good Luck
 
Back
Top