Alright so I know this is technically not the correct brand of tractor but I figure its electrical and it would apply.
So the tractor has a 6v single wire alternator that is wired to the junction terminal then it went to the ignition switch and the amp meter the amp meeter goes to the starter solenoid and hooks on the same terminal as the negative bater cable. The ignition switch goes to a terminal that has the resistor but the previous owner did not keep the resistor in the circuit and hooked the coil strait to the ignition wire. Does that sound like it is right or not? it used to have a generator and voltage regulator but they took those out. It has positive ground.
Hopefully one of you could help me on this one, thanks in advanced.
So the tractor has a 6v single wire alternator that is wired to the junction terminal then it went to the ignition switch and the amp meter the amp meeter goes to the starter solenoid and hooks on the same terminal as the negative bater cable. The ignition switch goes to a terminal that has the resistor but the previous owner did not keep the resistor in the circuit and hooked the coil strait to the ignition wire. Does that sound like it is right or not? it used to have a generator and voltage regulator but they took those out. It has positive ground.
Hopefully one of you could help me on this one, thanks in advanced.