Early IH belly mower

[coppersmythe]

IH belly mower in good shape , turns smoothly , just one pea sized rust hole and one pinhole next to it . Both muledrives go with it . Very worn international sticker still visible . Still has the metal tag with #s stamped on it . Pickup at Buddies cubfest in bogalusa or set up a cubexpress . coppersmythe.......... $250.00 TRADES CONSIDERED , Need two good turf tires (rear)

 

[tst]

That is a IH/Danco C2 mower Val

 

[coppersmythe]

Thanks "T" , I was not sure exactly what to call it . Hope your doing well , and y'all stay warm up there . Val

 

[Bob McCarty]

Val, the pins may be rusted in the holes and don't release to allow the ratcheting to occur. I'm unaware of C-2's that didn't ratchet, but could be wrong.

 

[coppersmythe]

Val, the pins may be rusted in the holes and don't release to allow the ratcheting to occur. I'm unaware of C-2's that didn't ratchet, but could be wrong.

Thanks for the heads up Bob , you piqued my curiosity . i'll report back . Val........

 

[coppersmythe]

Val, the pins may be rusted in the holes and don't release to allow the ratcheting to occur. I'm unaware of C-2's that didn't ratchet, but could be wrong.

Score one in the win column Bob , and thanks for the heads up ! It does have the rachet , it was a little stiff . guessing from old grease / sitting . It loosened up nicely.......coppersmythe

 

[inairam]

Score one in the win column Bob , and thanks for the heads up ! It does have the rachet , it was a little stiff . guessing from old grease / sitting . It loosened up nicely.......coppersmythe

I like the C-2 very much. If someone decides to inspect that overrun clutch, there are hollow tubes with one end capped and springs. Be careful, things could fly and get lost. They are very expensive to replace. Items 19 and 20 https://www.messicks.com/catalogs/c...00-complete-machine/j-03-platform-and-spindle.

 

[blessozuna]

Do you still have this