Pamela and I were also dismayed with the switch to digital. We went from 7 channels to one...channel 3.....sometimes!
We had an older chimney mount medium size antenna on the house with no rotator, an analog TV and Zenith converter box. We have absolutely no desire to PAY for cable or satellite channels we will never watch, so I did some checking around and came up with a plan.
I found a 24' antenna tower on craigslist for $75. There are even free ones advertised if you just come take them away, but I was always too late for those. Just look around near your home for towers with no antennas on them or even broken antennas on them and go ask ! The most they can say is no. You might even make a new friend who will let you plow their garden with your Cub like I did out of my quest for a tower !
As another member posted,
http://www.solidsignal.com was a great source for the 'new' stuff I had to get. They had the best prices I could find AND excellent customer service! There's two things that rarely go together anymore. I got a Winegard HD 8200U antenna(a monster at 9' x 14' but man does it work). I chose the largest antenna and no booster over a smaller antenna and trying to boost signals it cannot pull out of the air.....I mean, why would you buy a Smart Car when you have 5 kids and then wonder why y'all don't fit in it? I also got the Channel Master CM 9521A rotator with infra-red remote (very good decision), rotator control cable, and MOST IMPORTANTLY, the new RG-6 coax cable. Throw away your old RG-59...even the jumper cables. If you have any of that flat two wire 300ohm stuff, that absolutely has to go. Make new ones yourself to custom lengths as short as possible. If I can do it...you can too. I got the cable connectors and the (made in the USA)stripper/crimper at Home Depot. I also purchased a 10' steel mast pole from my local radio Shack. Remarkably, the 10' was cheaper than the 5 footer.....go figure....
The new digital signal is both more directional and line-of-sight than the old analog signals were. So, you need the best line-of-sight spot you can get. I installed my tower right next to and attached to the outbuilding 35 feet away from the house. It was the best compromise on location for me. Height is an issue as well. 30ft is a good minimum, and is how high my antenna is off the ground. It's also a chore I can handle myself if I ever need to pivot it back down to work on it. I installed the rotator inside the tower structure to reduce stress on the unit as well as a plate with pilot hole at the very top of the tower to keep the mast from slopping all around.
The result is very good reception and 48 channels, some of which are free HD with surround sound ! Granted, there is some time needed to set-up your converter box or TV tuner, but after you get all that out of the way it's a snap. Pamela has no trouble with it either after she understood how to move the antenna. I live at zip code 44646 (Massillon, OH) and get channels from Cleveland, Youngstown, Mansfield, St. Clairesville/Steubenville and even channel 7 out of Wheeling WVA !
HINT: This is very handy for 'blacked-out' sporting events.
It's also nice to have more choices. You'd be surprised what a distant network station has on that the Cleveland NBC station never airs.
We can do most of our viewing at one antenna position, that being north for the Cleveland channels.
We were so impressed with the picture quality improvement with the new antenna/converter box/analog tv setup that we looked into getting a new tv.
We found a fantastic deal at hhgregg on a Panasonic 32" VIERA LCD overstock that was too good to pass up.
The result now is nothing short of phenominal. We're watching the Olympics in HD with surround sound....for FREE ! Seriously...you can count beard hairs !! HA !
Here's a great website I found to see what channels are around you, the compass headings and very importantly, the correct RF frequency assigned to each. I pull in all the stations they say are fringe and many they say are not strong enough.
http://www.fcc.gov/mb/engineering/maps/
Just type in your street address and click GO !
As I mentioned, RF frequency and channel numbers do not match many times. You have to get this right, or you will not get a thing !
Example: Channel 19 from Cleveland is broadcast on RF 10. So, you have to program your TV 'tuner' to 10 for channel 19. This is done in setup mode on most converter boxes, but you can try it as a direct key input on your remote on some boxes and most current model digital ready TVs. Sounds confusing but it works. Once saved, the RF frequency will show up as the correct 'channel' on your TV. You may have to manually add a channel here and there if your auto-scan skipped it over.
If you have an old analog TV and converter box and have few or no channels, try deleting all the presets, removing the battery if your unit has battery back-up, unplugging it for a 1/2 hour or so, plugging it back in and starting all over with set-up and auto-scan. That works wonders many times.
If you have and indoor digital TV antenna and any kind of TV setup, good luck! They say structures can reduce available signal strengths by 50% or more.
Good luck to everyone with all this 'progress'.
PS: If the ground is frozen when you do something like this and run the cables across the lawn to the house to be buried in the spring....just don't forget they are there if you use the snowblower to clear a path in the record setting snow so you can more easily get to your beloved bird feeders......don't ask !

:brainfart: