Depth Control Lever

[ajhbike]

Can the depth control lever be installed with the rear draw bar in place?

 

[Don McCombs]

A little clarification is needed. The depth control lever for the 193 and 189 plows uses the drawbar in the forward position as a part of the assembly. The depth control lever for the early Fast Hitch cannot be used with the drawbar. Which are you asking about? Take a look at the photos on the TM Tractor Parts web site. I think that will help visualize things.

 

[ajhbike]

For the 193 with the draw bar forward. Prefer to leave it on when draw bar pointing to rear...plus...it is a nice hand bar getting up to the seat

 

[Glen]

Hi,
Yes, the depth control lever can be on when the drawbar is, it has to be on at the same time to use a plow.
The drawbar can be in either the rear position or the front position.

The lever mounts on the 2 holes above where the drawbar goes.
You might want to remove the vertical part that attaches on the drawbar, so it isn't hanging down to catch on things.

Below is a pic from TM Tractor showing the lever in position. The drawbar is in the front position in the pic, and it has a Cub 193 Plow on it.

 

[ajhbike]

Got it, thank you much

 

[Don McCombs]

You couldn’t install both drawbars with the plow attached.

Photo courtesy TM Tractor Parts

 

[ajhbike]

Thanks, yes I know that.