Deer Stand

Eugene

501 Club
IM000699.JPG

Base area is 4' X 8'. Smidgen over 8 feet from ground to upper cross bar. End frames are buried about 3 feet in the ground, staked and cemented. About 700 lbs of cement below ground level.

IM000700.JPG
:cry:
 
John *.?-!.* cub owner":2ru39msx said:
gonna be wobbly on top unless you put some diagonal braces on sides too.
Top cross member on front gets move so that it's level to the upper back one. Another set of cross members are to be place near the top of the structure. Game plan is to use sheet metal as siding for the shelter. 8 foot lengths, applied horizontally.

Short explaination. Son and I dug the holes and trenches for the standards and stood them up. Next day I squared up the standard on the left, staked and cemented it in place. Following day I leveled up the right standard, staked and cemented it in place.

There is a wire from the steel fence post on the right of the left standard to the standard. I used the post and wire to pull the standard level and square.

Photo taken minutes after cementing the right base. Will let set for a couple days then start on the shelter.
 
If it's the same locking pallet shelving that's in my barn, and your's are cemented in, you'll probably put 10 guys up there and it'll be solid as a rock. Mine are free standing on stone and solid.

Rick
 
The standards came from my previous place of employment. They were initially 26' long and bolted to the floor with 1 bolt at each corner. The cross members lock to the standards. The standards would get damaged by fork lifts then replaced. At that time scrap metal could be taken home, after being signed for.

Folks hunt does around here for the meat. You can get as many doe tags as your want in Osage county. Shoot a doe, go buy another resident tag for $17-. My son is the registered land owner. He applies for and gets a stack of land owner hunting tags each year, free.

All this work and I don't even go hunting.
 
ricky racer":1vlfh32i said:
It looks like all that's left is to mount the trailer on top and your ready for deer season. :wink:

Red%2520Neck%2520Deer%2520Stand_%28Small%29.jpg
Humm. I have a tall/walk in pickup topper sitting on the parking. Wonder if I need to hire a crane to put it on top of the poles.

I don't want to make the deer stand to comfortable. I have problems with guests who over stay their welcome.
 
Where do the deer stand ,,,,underneth?????hahahaha!!!!!! :lol: :lol: :lol: Kevin nice,I like it ---good luck
 
KETCHAM":ex36a2dt said:
Where do the deer stand ,,,,underneth?
Not sure about the deer, but son and I were standing beneath the floor during a rain shower this morning. Only have the upper 12 or so inches on the long sides to have the stand completely enclosed.

Game plan is to take a seat (lounge chair with drink holders on the side) into the stand and then locate and cut out the windows. Also need to make/weld up a ladder.

Looks like son and I will have just under $50- out of pocket in the completed deer stand.
 
IM000714.JPG

My brother came out the play with me. We put in the two long side windows and cut the short side window hole. Bout gotter done. Need to make up two side windows. Gonna send the picture to Mom to show her that we are no longer on the street and are staying out of trouble.
 
Back
Top