cub cadet 1330 mower spindles "locked"

B

boldpsi

Well-known member
all,
i have recently bought a Cub 1330 from a local guy who also used to have a Famrall Cub! $400!
anyway, i mowed a couple of times with this little mower and i'm impressed! i have a problem tho...
i put it on the ramps, and removed the blades and sharpened them. the mower engaged and cut grass just before this...
...also, when i stopped on the ramp, i locked the brake and got off... and the tractor's safety system shut the tractor down...
THEN i removed the blades, etc.
then, i replaced the blades, spindle covers, etc.
i noticed when replacing the blades that the spindles themselves seemed "locked". totally immobile. can't turn the blade if it's bolted full on.
and, when i try to mow, when i engage the electric clutch, it stalls the mower. so i think the switch and the clutch are good...
my question: is there some kind of mechanism (safety-related) that actually locks those spindles?!?!?!
help?!
dave
boldpsi@gmail.com
boldpsi on farmallcub.com forum
 
Try taking the main mower drive belt off. See if the blades are still stuck (problem on the deck) or not (problem in the clutch/drive of the tractor).
 
oh, boy, yous all will love this:
i realized after consulting the mower diagram with the expanded spindles, that i had put the bottom pully "bearing race/cover" on BELOW the blade, not ABOVE IT. so, the locking was of course solely due to me being a moron. :( :? :shock: :evil:
but it's fixed now :lol:
sorry to waste your time! :worthy:
 
You must log in or register to reply here.
Back
Top