cub belly mower

B

bjgravley

Well-known member
i'm getting ready to put a woods belly mower on my cub all the ones i've seen before have chains holding the mower up in front, but i saw on e-bay something other than chains holding the front up the item # on e-bay is 2589251377 if you want to look and let me know if this is something i could get for my cub thanks
 
What you see in the picture is commonly used for lifting tillage equipment (cultivators, hillers,chisels) and mid-mounted blades. It may also have been used to lift the C-2 and C-3 belly mowers sold by IH at the time cubs were sold. Jim Becker will be the authority on this subject.

The Woods mowers should have a series of flat metal straps connected together to raise and lower the mower. Check the manuals on Rudi's site for pictures.
 
A lot of companies made mowers for the Cub and they all look more or less the same. This one looks like it might be an IH C-2 although the owner modified skids look different. I believe the C-2 was lifted with a chain. It isn't clear to me from the pictures how the mower is attached for lifting.

The silver painted parts on this tractor are a set of universal mounting frames. These were used by most of the front mounted implements. The tool bars that are bolted to the mounting frames are the standard tool bars from a Cub-144 cultivator.
 
I have to admit that is a unique setup. I see he has some gards to push stuff beside where was cutting away from the tires. Wonder if he was mowing next to some shrubbery, or if it was just to keep tall grass from getting mashed down. My 42 inch Woods has flat steel extensions down from the front rockshaft that it lifts with rather than chains.
 
BJ,
I have two CUBS both have belly mowers fitted with chain lifts. I understand the chain lifts to more or less protect the mower deck while mowing. If you were to hit something with the deck while mounted rigid, I would think you would be more likely to bend something. Just like the front wheels on a triple blabe deck they tend to let the deck "FLOAT" over your cutting area. Just a thought.
Regards,
Larry Ball
 
LARRY BALL":20hdwopw said:
BJ,
I have two CUBS both have belly mowers fitted with chain lifts. I understand the chain lifts to more or less protect the mower deck while mowing. If you were to hit something with the deck while mounted rigid, I would think you would be more likely to bend something. Just like the front wheels on a triple blabe deck they tend to let the deck "FLOAT" over your cutting area. Just a thought.
Regards,
Larry Ball
Click to expand...
thanks alot that makes a lot of sence
 
With the one on Ebay, I agree that could be a problem, but the 42 I have is a factory lift, and the flat lift bars and made in a toggle arangement so that the mower is not held down by the lift, but if it hits something can ride up over it.
 
Here is a pic of the Woods 42 I sold. The lift linkage is laying over towards the front of the mower.



LinkPhoto
 
Mighty fine looking rig Jeff!

I have a 61 LoBoy with the Woods 59. But it is along way from yours!

That 55-57 series Cub is the coolest.
 
You must log in or register to reply here.
Back
Top