Cub 193 Dogbone Sketch/Dimensions

[Don McCombs]

I’ve had a request from a non-forum Cub owner for a sketch, with dimensions, for the Cub 193 dogbone. I can do it. But, in an attempt to not reinvent the wheel, has anyone done this before and can send me the desired information? Thanks!

 

[Bill V in Md]

Don, hope this helps

 

[staninlowerAL]

I've got a copy of Rudi's belcrank extension and one done by John Puckett if you want it. Can you post a pic or a link to it? Stan

 

[tmays]

Am I missing something? Don asked for dimensions of the 193 dog bone?

 

[staninlowerAL]

Is this it? photo from TM Tractor of 193 plow. Stan
2nd pic source is not known

 

[tmays]

Yes, that’s it, Stan. I thought there used to be a diagram somewhere on here. I have one, Don. Don’t know how good I’d be at sending measurements. If someone here doesn’t get you what you need, I can give it a try

 

[Don McCombs]

That’s it. Thomas, no need to send anything, as I have one too. Just trying to save some time if someone already had the info.

 

[staninlowerAL]

Yes, that’s it, Stan. I thought there used to be a diagram somewhere on here.........................

Yup, I also thought I remembered seeing one, maybe Member Made Drawings, etc but I couldn't find it either. I would think a close up photo of one along with a yardstick to show the measurements for the holes, etc would be enough to make one. Good luck Don, and thanks for helping. Stan
EDIT: Like this:

 

[Don McCombs]

I seem to remember seeing a drawing, too. Hence, the reason for my request for info. In the meantime, I’ll work something up. Maybe someone will volunteer to convert my sketch into an isometric drawing.