Could it be a 100?

J

Jackman

501 Club
Looking at a Farmall that is for sale ,it looks like a 100 has the 11 bar grill and same style front rims as 100, but does not have hydralics or any name plates the serial tag is sprayed over so I would have to scrape it to read. It does look alot like an A but some how appears to be just a tad smaller in size and less beefier than a A :? So with out scraping the tag is thaere a way to ID this tractor?
 
Sorry no pics, I think the # plate is in the same spot as a Cub , but I could be wrong the tractor is painted a heavy coat of redish/orange and I trhought the tag was on the bloster like a Cub :? , ... If it is a 100 or an A where should the serial# plate be?
 
The A and Super A serial plates were usually on the left seat bracket. Very early A had it on the shield below the pedals. 100 plate was on the bell housing. Cub and offset Lo-Boys are the only ones I know of with it next to the steering shaft/gear.
 
I may be off base here but Jim will correct me. A "A" has no provision for hydrolics. So a SA, 100 or 130 should have flat on the trans housing and bolt holes/threads for the T/C unit whether it was ordered with one or not.

Hopfull not confusing the issue

Billy
 
Cowboy":1ve9llc1 said:
So a SA, 100 or 130 should have flat on the trans housing
Click to expand...
On the top of the bell housing (or torque tube if you prefer) but yes, Super A on up will have provisions for mounting hydraulics.
 
You must log in or register to reply here.
Back
Top