Corn burning insert

Michael Beck

Well-known member
Have always used wood burning stoves for heat. The other day I was looking at a catalog with stoves that used corn. Has anyone used one of these? If so what are your thoughts. Thanks.
 
I understand they work ok. Just have to make sure the corn is very dry. Personally I would go for a pellet stove. I've had one for about four years now and love it. Just my two cents.
 
I have 2 corn stoves, one in the basement heating the house and one heating my shop. I like them just fine, although I could use a little bigger unit in my shop. I buy corn from a local farm, by the gravity wagon load. He dries his corn to 14% and it works fine. Most recommend lower moisture content, but I've not found it necessary. Both of my stoves are older units, I think they have made some improvements on newer ones, making them easier to maintain on a daily basis. I buy a few bags of pellets, each year, to use as starter fuel and was shocked at how expensive pellets are this year. The cost of corn is much less than half the cost of pellets.
 
Had my corn burner for 4 years now, love it! I use pellets in warmer weather then blend in corn as it gets colder, straight corn in very cold weather. 14% corn will work fine, I've not found moisture to be as much a problem as trash in the corn. Biggest problem is that when the power goes out you have to restart the stove. Pellet and corn price is about the same around here, the corn however puts out a LOT more heat.
 
I don't have experience with either but have a friend who has a pellet stove. Seems to me that using a pellet stove you are kind of locked into the pellet manufacturers and what ever price they might set. In our area there have been shortages of pellets in the past and you know what that does to the prices. Corn prices haven't moved much in the last 30 years. I had often thought if I had a corn stove, I'd do just like Gary and buy an old gravity wagon (you can pick up small ones cheap) and buy corn from a local farmer, probably the one that leases my property. Corn is only expensive when you buy it in bags. Offer a farmer a little more then market value for a wagon load of corn and you'll be set for the winter. Just my opinion.
 
The farm I buy from charges me current market price. My last load was $3.50 Bu. I don't know what the current price is, but will need to get another load in the next few days. I will probably empty the wagon into buckets today. We keep lots of buckets around for handling corn.
There was a major shortage of pellets here last year. Many people bought pellet stoves, then were unable to buy pellets for them. There were a lot of pellet stoves for sale last summer. Now, this year they have jacked the price of pellets.
Most corn stoves will burn corn or pellets, but pellet stove manufacturers warn against using corn. The stove in my shop burns either well, but I get more heat from corn. The stove in the house doesn't like pellets, they jam the auger, but will run on a mixture if I care to do that.
 
Gary Dotson":2mp9je5d said:
The farm I buy from charges me current market price. My last load was $3.50 Bu. I don't know what the current price is, but will need to get another load in the next few days. I will probably empty the wagon into buckets today. We keep lots of buckets around for handling corn.
There was a major shortage of pellets here last year. Many people bought pellet stoves, then were unable to buy pellets for them. There were a lot of pellet stoves for sale last summer. Now, this year they have jacked the price of pellets.
Most corn stoves will burn corn or pellets, but pellet stove manufacturers warn against using corn. The stove in my shop burns either well, but I get more heat from corn. The stove in the house doesn't like pellets, they jam the auger, but will run on a mixture if I care to do that.
Gary, what brand stove do you have? I'm using an England Stove. Do you have a stirrer in the firebox?
 
Both of my stoves are older Dove units. No, they don't have stir augers in the firebox, so the clinkers can get a little difficult sometimes. That's the main improvement i was referring to on the newer units.
The stove in my shop is a Dovetec insert model, that was sold & installed by a local company 23 years ago and never used. When i installed it in my shop three years ago it was 20 years old and had never had a fire in it. Having sat so long, I had to free up the blower motors to get it running, but it works fine now.
The stove in the house is a Dove freestanding model, probably slightly older than the other one. It was an ebay buy & had seen a good bit of use, but in very good condition. I have it located in the basement and connected to dedicated registers.
 
Back
Top