cooling system help

dakcub

501 Club
Can someone explain how a car/truck cooling system overflow tank works....I can understand how the cooling system puts water in the tank...but how does it take water from it...I dont understand it....
OBTW my truck ate the water pump this week....i was keeping an eye on it until today....it finally gave up....enterprise please pick me up...
Robert (in a rental for a while) Miller
 
Simple explanation; as the coolant heats up it expands into the overflow tank, as it cools, it contracts and the overflow empties.
 
Robert - as the liquid cools and contracts it creates a vacuum in the cooling system which siphons the coolant back out of the overflow into the system. If you look at the hose going into the overflow tank you will note it goes almost all the way to the bottom of the tank.
 
Bigdog":ni7af8wu said:
Robert - as the liquid cools and contracts it creates a vacuum in the cooling system which siphons the coolant back out of the overflow into the system. If you look at the hose going into the overflow tank you will note it goes almost all the way to the bottom of the tank.

So the pressure cap gasket allows the water to flow under vacuum? 10-4 thanks and to Donny also
 
A pressure radiator cap is a two-way valve. It requires the rated pressure for the expanding coolant to push through the valve. The little valve that goes the other way requires amost no pressure for the coolant to come back in when the system cools. The hose to the overflow tank works just like a straw in a soda glass.

In the old days, they put a big enough upper tank on radiators that they didn't need overflow tanks.
 
Jim Becker":1n6o9dcc said:
In the old days, they put a big enough upper tank on radiators that they didn't need overflow tanks.

Yup, but then someone had a better idea,

In the day radiators pushed and pulled air out and into the cooling system exposing the coolant to oxygen that would allow the cooling system to oxidize (Rust).

The overflow tank pushes and pulls coolant instead, this keeps oxygen out of the cooling system thereby reducing cooling system corrosion.

Jim Becker":1n6o9dcc said:
A pressure radiator cap is a two-way valve. It requires the rated pressure for the expanding coolant to push through the valve. The little valve that goes the other way requires amost no pressure for the coolant to come back in when the system cools.

The little valve is called the vacuum valve and includes a light spring to keep it closed so that the big spring (pressure relief Valve) can function as it should. Inspect a Radiator cap by holding it and inspecting the cap just the way it sets in the radiator, if the little dime sized vacuum valve hangs down and is loose (because the little spring is broken) the cap is defective and in the course of operation may or may not hold correct cooling system pressure. A bad vacuum valve causes erratic pushing of excess coolant into the overflow tank and then not drawing it back into the radiator.

Mark
 
cubguy's dad":gznv2t4e said:
Jim Becker":gznv2t4e said:
In the old days, they put a big enough upper tank on radiators that they didn't need overflow tanks.

Yup, but then someone had a better idea,

In the day radiators pushed and pulled air out and into the cooling system exposing the coolant to oxygen that would allow the cooling system to oxidize (Rust).

The overflow tank pushes and pulls coolant instead, this keeps oxygen out of the cooling system thereby reducing cooling system corrosion.
Now instead air is pushed out and pulled into the overflow tank so the coolant in it is constantly exposed to oxygen. (yeah, some are sealed but many are vented)

There was also the intermediate step when they made the overflow tanks too small and didn't have an overflow tank. (Chevy Vega had a recall, or maybe service campaign, to install overflow tanks after they replaced enough overheated engines.)
 
cubguy's dad":1s37crtv said:
Jim Becker":1s37crtv said:
In the old days, they put a big enough upper tank on radiators that they didn't need overflow tanks.

Yup, but then someone had a better idea,

In the day radiators pushed and pulled air out and into the cooling system exposing the coolant to oxygen that would allow the cooling system to oxidize (Rust).

The overflow tank pushes and pulls coolant instead, this keeps oxygen out of the cooling system thereby reducing cooling system corrosion.

Jim Becker":1s37crtv said:
A pressure radiator cap is a two-way valve. It requires the rated pressure for the expanding coolant to push through the valve. The little valve that goes the other way requires amost no pressure for the coolant to come back in when the system cools.

The little valve is called the vacuum valve and includes a light spring to keep it closed so that the big spring (pressure relief Valve) can function as it should. Inspect a Radiator cap by holding it and inspecting the cap just the way it sets in the radiator, if the little dime sized vacuum valve hangs down and is loose (because the little spring is broken) the cap is defective and in the course of operation may or may not hold correct cooling system pressure. A bad vacuum valve causes erratic pushing of excess coolant into the overflow tank and then not drawing it back into the radiator.

Mark

AND, then you have the new ones with no radiator cap and just an overflow tank, leaving one to wonder how he would replace the coolant :shock: :? :twisted:
 
Bill E Bob":fu8tqg27 said:
AND, then you have the new ones with no radiator cap and just an overflow tank, leaving one to wonder how he would replace the coolant :shock: :? :twisted:
I think part of the idea behind that is to force shade tree and old tractor mechanics to take it to a dealer and have it flushed rather than just draining and replacing.
 
John *.?-!.* cub owner":3aeqsjli said:
Bill E Bob":3aeqsjli said:
AND, then you have the new ones with no radiator cap and just an overflow tank, leaving one to wonder how he would replace the coolant :shock: :? :twisted:
I think part of the idea behind that is to force shade tree and old tractor mechanics to take it to a dealer and have it flushed rather than just draining and replacing.

Not to mention what they're doing to independent shops by withholding computer codes etc :shock: :twisted:
 
Although the coolant level in the recovery reservoir goes up and down, the radiator and cooling system are kept full. An advantage to using a coolant recovery reservoir is the elimination of almost all air bubbles from the cooling system. Coolant without bubbles absorbs heat much better than coolant with bubbles.

Jim Stated:

There was also the intermediate step when they made the overflow tanks too small and didn't have an overflow tank. (Chevy Vega had a recall, or maybe service campaign, to install overflow tanks after they replaced enough overheated engines.)

When the engine overheated all the coolant went on the ground. When the recovery reservoir was added the coolant system fluid loss stopped and the engine problems stopped. I did a few of those campaigns.

Bill E Bob stated
AND, then you have the new ones with no radiator cap and just an overflow tank, leaving one to wonder how he would replace the coolant

Supposedly with the type of coolant they use now the coolant is designed to remain in the vehicle for five years or 150,000 miles. In the real world I have seen the Ford clear and GM orange coolant start a corrosion problem way before that. Ford and GM still have drain plugs on the bottom or their radiators, but sometimes you have to remove the bumper to get to them.

Bill E Bob stated
Not to mention what they're doing to independent shops by withholding computer codes etc

With the freedom of information act you can purchase the factory software and information for your use. All it takes is money and sometimes a lot of it.
 
In case someone wonders if a coolant recovery system would be a good idea on a cub, it isn't, I tried it one time. As you mow the coolant continuously surges out and then draws back in, and when you stop you can hear the engine boiling. I took it off after only a little use.
 
Jack Fowler":37r6skbx said:
Supposedly with the type of coolant they use now the coolant is designed to remain in the vehicle for five years or 150,000 miles. In the real world I have seen the Ford clear and GM orange coolant start a corrosion problem way before that. Ford and GM still have drain plugs on the bottom or their radiators, but sometimes you have to remove the bumper to get to them.
Several vehicles back, I ran into a block drain that I couldn't get out, no matter how hard I tried. I finally gave up and simply did several refill/drain cycles until the water came out mostly clear. I then used the published capacity to decide how much antifreeze should be required, which fit but was close to filling it up. I have given up on block drains since I can't even find them on some cars now. I suppose they are under there somewhere. The drawback of my method is that using distilled water isn't practical.
 
Very interesting topic I picked here.....lots of good info from peolpe I can trust...bottom line....I get my truck back tomorrow for a new water pump and intake manifold gasket, tranny flush, new belt, and misc maint......$1,300.00 later And I have a new truck with no payment
Robert (scores again in 2010) Miller
 
I don't use distilled water however I go to my local stream from the mountain and filter it through a coffee filter and have never had a problem. :-)
 
Jack Fowler":tjn67kx8 said:
Jim Backer wrote:
The drawback of my method is that using distilled water isn't practical.

I thought I was the only one who put distilled water in an engine cooling system.

I typically do as well, if not distilled I'll filter the water, don't want to put a bunch of minerals in with new antifreeze.

My typical method is to pull the lower radiator hose and drain as much as possible. On radiators with out any fill cap do you see a bleeder screw at the high point in the system? Often its possible to pour a good quantity into the highest radiator hose, with the highest bleeder open, and then get the air out of the system. Sometimes that's a pain involving parking the car on inclines, jacking the front up, squeezing hoses etc.

The only times I've seen problems with the new extended life antifreeze were when they were low for a prolonged period of time.
 
Back
Top