Jim Becker":1s37crtv said:
In the old days, they put a big enough upper tank on radiators that they didn't need overflow tanks.
Yup, but then someone had a better idea,
In the day radiators pushed and pulled air out and into the cooling system exposing the coolant to oxygen that would allow the cooling system to oxidize (Rust).
The overflow tank pushes and pulls coolant instead, this keeps oxygen out of the cooling system thereby reducing cooling system corrosion.
Jim Becker":1s37crtv said:
A pressure radiator cap is a two-way valve. It requires the rated pressure for the expanding coolant to push through the valve. The little valve that goes the other way requires amost no pressure for the coolant to come back in when the system cools.
The little valve is called the vacuum valve and includes a light spring to keep it closed so that the big spring (pressure relief Valve) can function as it should. Inspect a Radiator cap by holding it and inspecting the cap just the way it sets in the radiator, if the little dime sized vacuum valve hangs down and is loose (because the little spring is broken) the cap is defective and in the course of operation may or may not hold correct cooling system pressure. A bad vacuum valve causes erratic pushing of excess coolant into the overflow tank and then not drawing it back into the radiator.
Mark